United Arab Emirates
Cylinders with integrated guide
Series QC
Double-acting, magnetic piston, guided
ø 20, 25, 32, 40, 50, 63 mm
ø 20, 25, 32, 40, 50, 63 mm
These actuators, suitable for use in very limited space, are available in two versions.
QCT version: with sintered bronze bushes, suitable when the side loads applied to the cylinder are high.
QCB version: with linear ball bearings, suitable for high precision and fast cycling applications.
Both versions are equipped with fixed cushioning to prevent direct impact with the end covers. The design of the cylinder body allows the mounting of the cylinder using either top, bottom or side faces. Several “T” shaped grooves in two faces allow sensors to be fitted in a number of positions.
Out of standard strokes are available on demand only.
QCT version: with sintered bronze bushes, suitable when the side loads applied to the cylinder are high.
QCB version: with linear ball bearings, suitable for high precision and fast cycling applications.
Both versions are equipped with fixed cushioning to prevent direct impact with the end covers. The design of the cylinder body allows the mounting of the cylinder using either top, bottom or side faces. Several “T” shaped grooves in two faces allow sensors to be fitted in a number of positions.
Out of standard strokes are available on demand only.
Download catalogueSeries
Accessories
Compact guide cyl. ser. qc - QCB2A020A020
|
Bore
20
|
Stroke
20
|
Compact guide cylinder qc - QCB2A020A030
|
|
Bore
20
|
Stroke
30
|
Compact guide cylinder qc - QCB2A020A040
|
|
Bore
20
|
Stroke
40
|
Compact guide cyl. ser. qc - QCB2A020A050
|
|
Bore
20
|
Stroke
50
|
Compact guide cylinder qc - QCB2A020A075
|
|
Bore
20
|
Stroke
75
|
Compact guide cylinder qc - QCB2A020A100
|
|
Bore
20
|
Stroke
100
|
Compact guide cylinder qc - QCB2A020A200
|
|
Bore
20
|
Stroke
200
|
Compact guide cylinder qc - QCB2A025A020
|
|
Bore
25
|
Stroke
20
|
Compact guide cylinder qc - QCB2A025A030
|
|
Bore
25
|
Stroke
30
|
Compact guide cylinder qc - QCB2A025A040
|
|
Bore
25
|
Stroke
40
|
Compact guide cyl. ser. qc - QCB2A025A050
|
|
Bore
25
|
Stroke
50
|
Compact guide cyl. ser. qc - QCB2A025A075
|
|
Bore
25
|
Stroke
75
|
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Type of construction | Compact guided QCT = sintered bronze bushes QCB = linear ball bearings |
| Operation | Double-acting |
| Materials | Body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU |
| Mounting | Threaded and non-threaded holes in the body |
| Strokes min. max | (see table) |
| Operating temperature | 0°C ÷ 80°C (with dry air - 20°C) |
| Speed | 50 ÷ 500 mm/s |
| Operating pressure | 1 ÷ 10 bar |
| Fluid | Clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Coding example
| QC | T | 2 | A | 020 | A | 050 |
| QC | SERIES | |
| T |
VERSION: T = sintered bronze bushes B = linear ball bearings |
|
| 2 |
OPERATION: 2 = double-acting |
PNEUMATIC SYMBOLS CD07 |
| A |
MATERIALS: A = anodized aluminium body - rolled stainless steel AISI 303 piston rod rolled stainless steel AISI 420B columns for QCT - hardened steel C50 columns for QCB |
|
| 020 |
BORE: 020 = 20 mm - 025 = 25 mm - 032 = 32 mm - 040 = 40 mm - 050 = 50 mm - 063 = 63 mm |
|
| A |
TYPE OF DESIGN: A = standard |
|
| 050 | STROKE (see the table) |
