Argentina
Roundline cylinders
Series 27
Double-acting, magnetic
ø 20, 25, 32, 40, 50, 63 mm
ø 20, 25, 32, 40, 50, 63 mm
Series 27 has been designed to reduce the cylinders sizes as much as possible. These cylinders have been constructed with clean lines using stainless steel for both the tube and the rod and Aluminium for the end-blocks.
The choice of material and other design features have allowed to create a range of versatile and reliable cylinders.
The precise method of securing the tube to the end block ensures that all the parts are perfectly aligned. Mechanical cushioning has been fitted on these cylinders in order to reduce noise produced by the piston impact on the end-blocks. Cylinders Series 27 are suitable for assembling with magnetic sensors. Various mounting bracket accessories enable the cylinders to be fitted to suit the requirements of a particular application.
The choice of material and other design features have allowed to create a range of versatile and reliable cylinders.
The precise method of securing the tube to the end block ensures that all the parts are perfectly aligned. Mechanical cushioning has been fitted on these cylinders in order to reduce noise produced by the piston impact on the end-blocks. Cylinders Series 27 are suitable for assembling with magnetic sensors. Various mounting bracket accessories enable the cylinders to be fitted to suit the requirements of a particular application.
Download catalogue
Series
Accessories
Cylinder ser. 27 - 27M2A20A0010
|
Bore
20
|
Stroke
10
|
Cylinder ser. 27 - 27M2A20A0025
|
|
Bore
20
|
Stroke
25
|
Cylinder ser. 27 - 27M2A20A0040
|
|
Bore
20
|
Stroke
40
|
Cylinders - 27M2A20A0050
|
|
Bore
20
|
Stroke
50
|
Cylinder ser. 27 - 27M2A20A0100
|
|
Bore
20
|
Stroke
100
|
Cylinders - 27M2A20A0125
|
|
Bore
20
|
Stroke
125
|
Cylinders - 27M2A20A0200
|
|
Bore
20
|
Stroke
200
|
Cylinder ser. 27 - 27M2A25A0025
|
|
Bore
25
|
Stroke
25
|
Cylinder ser. 27 - 27M2A25A0050
|
|
Bore
25
|
Stroke
50
|
Cylinder ser. 27 - 27M2A25A0080
|
|
Bore
25
|
Stroke
80
|
Cylinder ser. 27 - 27M2A25A0100
|
|
Bore
25
|
Stroke
100
|
Cylinder ser. 27 - 27M2A32A0025
|
|
Bore
32
|
Stroke
25
|
Cylinder brackets - B-27-50
Cylinder brackets - B-27-63
Rear trunnion - I-27-20
Cylinder brackets - I-27-25
Rear trunnion bracket - I-27-32
Cylinder brackets - I-27-40
Cylinder brackets - I-27-50
Cylinder brackets - I-27-63
Swivel ball joint - GA-50-63
Nut m18x1,5 _ - V-27-25
Compensator joint m10x1,25 - GKF-25-32
Coupler m12x1,25 - GKF-40
Compensator joint m16x1,50 - GKF-50-63
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Type of construction | Flanged |
| Operation | Double acting |
| Materials | Rod: Ø20 - 25 stainless steel AISI 303 - Ø32 ÷ 63 stainless steel AISI 420B tube: INOX AISI 304 piston and rod seals = PU |
| Mounting | Feet - trunnion - steel bar - pins |
| Strokes (min-max) | All diameters 10 - 1000 mm |
| Bores | ø 20, 25, 32, 40, 50, 63 mm |
| Operating temperature | 0°C ÷ 80°C (with dry air - 20°C) |
| Operating pressure | 1 ÷ 10 bar |
| Speed | 10 ÷ 1000 mm/sec (no load) |
| Fluid | Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Coding example
| 27 | M | 2 | A | 20 | A | 0050 |
| 27 | SERIES | |
| M |
VERSION M = rear endblock with trunnion and upper round port for ø 20-25-32-40 T = rear endblock with rear round port for ø 20-25-32-40 U = rear endblock with upper round port for ø 20-25-32-40-50-63 |
|
| 2 |
OPERATION 2 = double-acting |
PNEUMATIC SYMBOL CD08 |
| A |
MATERIALS A = rolled stainless steel rod - stainless steel tube |
|
| 20 |
BORE 20 = 20 mm - 25 = 25 mm - 32 = 32 mm - 40 = 40 mm - 50 = 50 mm - 63 = 63 mm |
|
| A |
TYPE OF DESIGN A = standard |
|
| 0050 | STROKE (see the table) |
1-16/17 results
