Zylinder
Serie 41K
Aluminiumprofil, doppeltwirkend,
mit Endlagendämpfung, Magnetversion
ø 160 - 200 mm
mit Endlagendämpfung, Magnetversion
ø 160 - 200 mm
Die Zylinder der Serie 41K mit ø 160 und 200 mm sind ISO 15552 konform / DIN ISO 6431 / VDMA 24562. Standardausführung ist die Magnetversion mit einem im Kolben integrierten Permanentmagneten zur berührungslosen Abtastung.
Das Zylinderrohr: Dieser Zylinder zeichnet sich durch sein Design in Bezug auf geringe Schmutzecken aus. Außerdem stellt die Verwendung des kaltgezogenen Aluminiumprofils in Verbindung mit integrierten unsichtbaren Zugankern eine robuste, sichere Konstruktion dar.
Die Dämpfung: In beiden Endlagen ist dieser Zylinder mit einer mittels Schraubendreher einstellbaren Endlagendämpfung ausgerüstet.
Das Zylinderrohr: Dieser Zylinder zeichnet sich durch sein Design in Bezug auf geringe Schmutzecken aus. Außerdem stellt die Verwendung des kaltgezogenen Aluminiumprofils in Verbindung mit integrierten unsichtbaren Zugankern eine robuste, sichere Konstruktion dar.
Die Dämpfung: In beiden Endlagen ist dieser Zylinder mit einer mittels Schraubendreher einstellbaren Endlagendämpfung ausgerüstet.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
there are no salable codes online
Look in the "Accessory" tab for the Configurator
addtocart.popup.message.success
Die angeforderte Menge ist teilweise bestätigt.
Das Produkt {0} befindet sich bereits mit der Menge {1} in Ihrem Warenkorb. Sie können die Menge auf der Seite "Warenkorb" aktualisieren.
Das Produkt ist nicht aktiv.
Das Produkt konnte nicht in den Warenkorb gelegt werden, da es nicht vorrätig ist.
Die Menge muss größer Null sein.
Die zulässige Mindestmenge für das Produkt {0} ist {1}.
Die maximal zulässige Menge für Produkt {0} ist {1}.
Die Verpackungseinheit für Produkt {0} ist {1}.
Es ist nicht möglich, das Produkt mit dem Code {0} in den Warenkorb zu legen.
Es ist ein Fehler aufgetreten, bitte versuchen Sie es später noch einmal oder wenden Sie sich an den Kundenservice.
Bauart | Aluminiumprofil mit integrierten Zugankern |
Funktion | Doppeltwirkend |
Konstruktion | ISO 15552 |
Werkstoffe | Köpfe + Kolben AL, Kolbenstange Edelstahl gerollt 1.4028, Kolbenstangenmutter Stahl verzinkt, Rohr AL-Profil eloxiert, Zuganker + Zugankermuttern Stahl verzinkt, Dichtungen: Kolbenstange, Kolben, Dämpfung NBR, Abstreifer in Messing |
Befestigungsart | Flansch vorn/hinten - Fußbefestigung - Mittelschwenklager - Schwenkgabel vorn/hinten |
Hub min - max | 10 ÷ 2500 mm |
Betriebstemperatur | 0°C ÷ 80°C (getrocknete Luft - 20°C) |
Betriebsdruck | 1 ÷ 10 bar |
Geschwindigkeit | 10 ÷ 500 mm/sec (ohne Last) |
Medium | Gefilterte, ölfreie Luft, im Falle von geölter Luft empfehlen wir die Verwendung von Öl ISO VG 32 und die Schmierung nie zu unterbrechen |
addtocart.popup.message.success
Die angeforderte Menge ist teilweise bestätigt.
Das Produkt {0} befindet sich bereits mit der Menge {1} in Ihrem Warenkorb. Sie können die Menge auf der Seite "Warenkorb" aktualisieren.
Das Produkt ist nicht aktiv.
Das Produkt konnte nicht in den Warenkorb gelegt werden, da es nicht vorrätig ist.
Die Menge muss größer Null sein.
Die zulässige Mindestmenge für das Produkt {0} ist {1}.
Die maximal zulässige Menge für Produkt {0} ist {1}.
Die Verpackungseinheit für Produkt {0} ist {1}.
Es ist nicht möglich, das Produkt mit dem Code {0} in den Warenkorb zu legen.
Es ist ein Fehler aufgetreten, bitte versuchen Sie es später noch einmal oder wenden Sie sich an den Kundenservice.
MODELLBEZEICHNUNG
41 | K | 2 | P | 160 | A | 0200 |
41 | SERIES | |
K |
VERSION K = standard magnetic |
|
2 |
OPERATION 2 = double-acting, front and rear cushions 3 = double-acting, no cushion 4 = double-acting, rear cushions 5 = double-acting, front cushion 6 = double-acting, through-rod, front and rear cushions 8 = double-acting, through-rod, no cushion |
PNEUMATIC SYMBOLS CD09 CD07 CD37 CD38 CD13 CD14 |
P |
MATERIALS P = see the GENERAL DATA table on the previous page R = AISI 420B stainless steel tie-rods, AISI 303 stainless steel tie-rod nuts C = rolled AISI 303 stainless steel piston rod, AISI 304 stainless steel piston rod nut U = rolled stainless steel AISI 303 piston rod, AISI 304 stainless steel piston rod nut, stainless steel AISI 420B tie-rods, stainless steel AISI 303 tie-rod nuts, AISI 420B stainless steel tie-rods, AISI 303 stainless steel tie-rod nuts W = rolled AISI 304 stainless steel piston rod, AISI 304 stainless steel piston rod nut, AISI 420B stainless steel tie-rods, AISI 303 stainless steel tie-rod nuts |
|
160 |
BORE 160 = 160 mm - 200 = 200 mm |
|
A |
TYPE OF DESIGN A = standard F = cylinder with centre trunnion |
|
0200 | STROKE (see the table) | |
= standard V = FKM rod seal W = all seals in FKM +130°C C = PU coated cylinder. Colour: Grey G = with brass rod scraper (chrome plated AISI 420B stainless steel rod, NBR rod seal) ( _ _ _ ) = extended piston rod _ _ _ mm Note: Version C is available on request. For further information, please contact our technical dept. |
||
CERTIFICATIONS EX = ATEX |
1-16/16 Ergebnisse