Digital pressure gauges
Series PG
Possibility of a direct mounting with rear or panel connection
The new Series PG digital pressure gauges meet the need of an even more precise pressure adjustment, above all in proportional control.
Thanks to the IP65 protection class these pressure gauges are particularly suitable for applications where the highest environmental protection is required.
Thanks to the IP65 protection class these pressure gauges are particularly suitable for applications where the highest environmental protection is required.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
there are no salable codes online
Look in the "Accessory" tab for the Configurator
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Vacuum PG...-VB | Pressure PG...-VB | |
Pressure units |
psi, bar, mmHg, kPa programmable by the user |
psi, bar, kgf/cm², MPa programmable by the user |
Rated pressure range | 0 ÷ -1 bar | 0 ÷ 10 bar |
Display pressure range | 0.1 ÷ -1 bar | -0.1 ÷ 10 bar |
Withstand pressure | 3 bar | 15 bar |
Repeatability | ≤ ± 1% F.S. ± 1 digit | ≤ ± 0,2% F.S. ± 1 digit |
Resolution | ||
kPa | 1 | - |
MPa | - | 0.001 |
kgf/cm² | 0.01 | 0.01 |
bar | 0.01 | 0.01 |
psi | 0.1 | 0.1 |
Indicator accuracy | ≤ ± 2% F.S. ± 1 digit (ambient temperature: 25 ± 3°C) | |
Medium | Filtered air, incombustible and non-corrosive gases | |
Back light | Yes | |
Sample rate | 2 Hz (2 times/second) | |
LCD display | 3 ½ digit, 7 segment | |
ENVIRONMENT | ||
Protection class | IP65 (an air tube must be installed to maintain this grade) | |
Temperature | Operation: 0 ÷ 50°C Storage: -10 ÷ 60°C (no condensation or freezing) |
|
Relative humidity | Operation/storage: 35 ÷ 85% RH (no condensation) |
|
Vibrations | Total amplitude 1.5mm or 10G 10Hz-55Hz-10Hz scan for 1 minute 2 hours for each direction of X, Y and Z |
|
Shock | 100 m/s² (10G) 3 times for each direction of X, Y and Z |
|
Changes due to temperature | ≤ ± 2% F.S. of detected pressure (25°C) within the operating temperature range | |
Pneumatic connections ports | G1/4 - M5 or G1/8 - M5 | |
FOR BATTERY-POWERED PRESSURE GAUGES ONLY | ||
Battery type | CR 2032 lithium | |
Life | 1 year (5 times/day) | |
Low-power indicator | Yes | |
Replacement | Yes | |
Turn-on interval | Display turns off after 60 seconds | |
FOR PRESSURE GAUGES WITH POWER SUPPLY CABLE ONLY | ||
Supply voltage | from 12 to 28 V DC±10% Ripple | |
Power consumption | 10 mA | |
Maximum voltage | 1000V AC in 1-min (between the casing and the cables) | |
Isolation resistance | 50 Mohm min (at 500 V DC, between the casing and the cables) | |
Electrical connection | ||
for pressure gauges PG…-2 | Unshielded 2-pole cable, length 2 m | |
for pressure gauges PG…-M | Connection with M8 4-pole connector |
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Coding example
PG | 010 | P | B | 1/8 | 2 |
PG | SERIES |
010 |
BOTTOM SCALE 010 = 10 bar 001 = -1 bar |
P |
PRESSURE RANGE P = pressure V = vacuum |
B |
LIGHTING B = back light |
1/8 |
PNEUMATIC CONNECTIONS 1/8 = G 1/8 BSPP; M5 1/4 = G 1/4 BSPP; M5 (for battery-powered version only) |
2 |
ELECTRICAL CONNECTION (for version with cable only): 2 = with unshielded 2-pole cable of 2 m M = with cable of 150 mm and M8 4-pole connector |