text.skipToContent text.skipToNavigation
Series SWMN and SWMS

Series SWMN and SWMS

Ports: G1/8, M5 thread or Ø 4, 6 mm plug-in tube
Measuring range: 0 ÷ -1 bar, 0 ÷ 1 bar with analog output,
0 ÷ -1 bar, 0 ÷ 6 bar with digital PNP output
The Series SWMN and SWMS vacuum/pressure switches can be installed directly at the measuring point or pressure/vacuum determination point in handling systems, thanks to its highly compact dimensions.

Its reduced weight (only 50 grams with a 2 meter cable) and robust construction allow its installation on applications with high accelerations.

The four types of connection enable a high flexibility and an easy installation inside machines or pneumatic cabinets.
Series
1 Products found
Pressure switch _ - SWMN-AP-T-2
Series SWMN and SWMS
Operating pressure range -1 ÷ 0 bar; 0 ÷ 10 bar; -1 ÷ 10 bar
Medium filtered air and inert gases
Supply voltage 12 ÷ 24 V DC
Maximum load 80 mA (SWMN-AP/AV/PN/PP)
40 mA (SWMS-NO/NC)
Voltage drop 0.8 V (SWMN-AP/AV/PN/PP)
5 V (SWMS-NO/NC)
Short circuit protection models SWMN-AP/AV/PN/PP
Response time about 1 msec
Repeatibility ±1% F.S.
Hysteresis 3% F.S. (SWMN-AP/AV/PN/PP)
4% F.S. (SWMS-NO/NC)
Protection class IP40
Operating temperature 0 ÷ 50°C
Connection cable oil resistant, 2 or 3-wire cable (according to the model), outer sheath Ø 2.6 mm
Full screen
Your configuration
CODING EXAMPLE
SWMN AP T 2
SWMN SERIES
SWMN
SWMS
AP OUTPUT SIGNAL (SWMN)
AV = analog output signal - vacuum
AP = analog output signal - pressure
PN = PNP output - vacuum
PP = PNP output - pressure
OUTPUT SIGNAL (SWMS)
NO = normally open
NC = normally closed
T TYPE OF CONNECTION
T = Ø 6 tube
U = Ø 4 tube (only for SWMN)
G = G1/8 thread
M = M5 thread
2 ELECTRIC CONNECTION
2 = cable of 2 meters
M = M8 3 pin connector
We think you are in United States.
Update your location?