text.skipToContent text.skipToNavigation
Series MD

Series MD

Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
Series MD filter-regulators integrate filter and pressure reducer in one unit, thus reducing their dimensions.
The by-pass valve allows the fast exhaust of the air introduced. The different springs enable a more accurate adjustment of the pressure.

Thanks to the solution adopted for the pneumatic connection, it is possible to equip the same element with interchangeable cartridges that can either be threaded, or with an integrated super-rapid fitting, both types available in different sizes. Intermediate cartridges can be also integrated to join multiple functions or with derivation to draw air.
Series
Accessories
4 Products found
Series MD
Filter-regulator ser. md - MD1-FR0000-1/4
Series MD
Filter-regulator - MD1-FR0000-1/8
Series MD
Filter-regulator - MD1-FR0500-1/4
Series MD
Construction modular, compact with filtering element in HDPE
Materials see TABLE OF MATERIALS on the following page
Ports with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with diameters of 6, 8 and 10 mm
Condensate capacity 24 cm³
Mounting in-line;
wall-mounting by means of through holes in the body or with a support bracket;
panel mounting
Operating temperature -5°C ÷ 50°C up to 16 bar (with the dew point of the fluid lower than 2°C at the min. working temperature)
Condensate drain semi-automatic manual, automatic, protected depressurisation, direct G1/8 exhaust
Quality of delivered air according to ISO 8573-1:2010 Class 6.8.4 with 5 µm filtering element
Class 7.8.4 with 25 µm filtering element
Inlet pressure 0.3 ÷ 16 bar ( with automatic drain 1 ÷ 9 bar )
Exit pressure 0.5 ÷ 2bar 0.5 ÷ 4bar
0.5 ÷ 7bar 0.5 ÷ 10bar
Nominal flow see FLOW DIAGRAMS on the following pages
Fluid compressed air
Full screen
Your configuration
CODING EXAMPLE
MD 1 FR 0 0 0 0 1/8
MD SERIES
1 DIMENSION:
1 = 42 mm
FR FILTER-REGULATOR
0 FILTERING ELEMENT (further details in the dedicated section) AND DESIGN TYPE:
0 = 25 µm with relieving
1 = 5 µm with relieving
2 = 25 µm without relieving *
3 = 5 µm without relieving *
4 = 25 µm with relieving and by-pass valve
5 = 5 µm with relieving and by-pass valve
6 = 25 µm without relieving, with by-pass valve *
7 = 5 µm without relieving, with by-pass valve *

* this option is available with semiautomatic-manual drain only
0 DRAINING OF CONDENSATE (further details in the dedicated section):
0 = semiautomatic-manual drain
3 = automatic drain
5 = protected depressurisation
8 = direct G1/8 exhaust
0 OPERATING PRESSURE (1 bar = 14,5 psi):
0 = 0.5 ÷ 10 bar
2 = 0.5 ÷ 2 bar
4 = 0.5 ÷ 4 bar
7 = 0.5 ÷ 7 bar
0 PRESSURE GAUGE:
0 = without pressure gauge (with 1/8 port)
1/8 PORTS (IN - OUT)*:
= without cartridges
1/8 = G1/8
1/4 = G1/4
3/8 = G3/8
6 = tube Ø6
8 = tube Ø8
10 = tube Ø10

* NOTE: if the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated.
Example: MD1-FR0000-1/4-1/8

Series MD filter-regulators - dimensions



Mod. A B C D E F G H I L M N P Q R S T U V W Peso (Kg) Z Weight (kg)
MD1-FR0000 - G1/8 42 Ø28 42 M28X1,5 G1/8 26.2 43 Ø4 110 208.2 22.7 4 51.7 133.2 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2
MD1-FR0000-1/8 G1/8 G1/8 42 Ø28 42 M28X1,5 G1/8 26.2 43 Ø4 110 208.2 22.7 4 51.7 133.2 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2
MD1-FR0000-1/4 G1/4 G1/8 42 Ø28 42 M28X1,5 G1/8 26.2 43 Ø4 110 208.2 22.7 4 51.7 133.2 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2
MD1-FR0000-3/8 G3/8 G1/8 42 Ø28 42 M28X1,5 G1/8 26.2 43 Ø4 110 208.2 22.7 4 51.7 133.2 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2
MD1-FR0000-6 Ø6 G1/8 47 Ø28 42 M28X1,5 G1/8 26.2 43 Ø4 110 208.2 22.7 4 51.7 133.2 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2
MD1-FR0000-8 Ø8 G1/8 62 Ø28 42 M28X1,5 G1/8 26.2 43 Ø4 110 208.2 22.7 4 51.7 133.2 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2
MD1-FR0000-10 Ø10 G1/8 67 Ø28 42 M28X1,5 G1/8 26.2 43 Ø4 110 208.2 22.7 4 51.7 133.2 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2
MD1-FR0000 - G1/8 42 Ø28 42 M28X1,5 M10x1 26.2 43 Ø4 110 197.6 22.7 4 51.7 122.9 34.6 0 ÷ 11 9 48.8 0.2 Ø3.2 0.2


We think you are in United States.
Update your location?