Denmark
Download catalogueSeries
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
.jpg "Mod. R")
Rear trunnion (ball joint) - R-41-100
Rear trunnion - R-41-125
Clevis pin - S-50
.jpg "Mod. C")
.jpg "Mod. C-H")
Front/rear trunnion (female) - C-H-41-100
Front/rear trunnion (female) - C-H-41-125
Rear trunnion (female) - C-H-41-63
Front/rear trunnion (female) - C-H-41-80
.jpg "Mod. H")
Foot mount - B-41-32
Foot mount - B-41-40
Foot mount - B-41-50
Foot mount - B-41-63
Foot mount - B-41-80
.jpg "Mod. D-E")
Front/rear flange - D-E-41-100
Front/rear flange - D-E-41-125
Front/rear flange - D-E-41-32
Front/rear flange - D-E-41-40
Front/rear flange - D-E-41-63
Rod clevis - G-25-32
Rod clevis - G-40
Rod clevis - G-41-125
Rod clevis - G-50-63
Rod clevis - G-80-100
Rear trunnion (male) - L-41-100
Rear trunnion (male) - L-41-125
Rear trunnion (male) - L-41-32
Rear trunnion (male) - L-41-40
Rear trunnion (male) - L-41-50
Rear trunnion (male) - L-41-63
Rear trunnion (male) - L-41-80
Counter bracket for cntr trn - BF-100-125
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Coding example
| 63 | M | P | 2 | C | 050 | A | 0400 | FL | W |
| 63 | SERIES | |
| M |
VERSION M = standard, magnetic |
|
| P |
CONSTRUCTION P = profile |
|
| 2 |
OPERATION 2 = double-acting |
|
| C |
CUSHIONING C = cushioning on both sides |
|
| 050 |
BORE 032 = 32 mm 040 = 40 mm 050 = 50 mm |
063 = 63 mm 080 = 80 mm 100 = 100 mm 125 = 125 mm |
| A |
CONSTRUCTION A = standard with rod nut DC = back to back cylinder with DC accessory [X1/X2] |
F = cylinder with centre trunnion |
| 0400 |
STROKE = standard |
|
| FL |
CONSTRUCTIVE TYPE FL = Front lock (extended rod lock) BL = Rear lock (retracted rod lock) DL = front & rear lock |
PNEUMATIC SYMBOLS CD34 CD35 CD36 |
| W |
TEMPERATURE RANGE* = standard (-20°/+80°) W = high temperatures (150°C) |
Z = low temperatures (-40°C) Y = low temperatures (-50°C) |
|
CORROSION RESISTANCE* = standard C2 = treated end cap screws (profile) or AISI 303 tie-rod nuts and AISI 420B tie-rods (Ø 125) C3 = C2 + AISI 316 rod nut, AISI 316 rod |
C5 = C3 + end caps END LOCK with triple protection (only for constructive type FL and BL) |
|
|
TYPE OF MANUAL UNLOCKING = manual with M3 screw (not supplied) T = manual with unhooking pin and protective cover |
||
|
ROD VARIATIONS = standard (male rod thread) K = end caps without END LOCK with Kanigen treatment (only for lock type FL and BL, only for corrosion resistance category C2 and C3) V = FKM rod seal R = NBR rod seal |
G = dusty and dirty environments (with metal scraper and chrome-plated AISI 420B rod) B = cylinder with NBR bellow rod protection (___) = extended rod___ mm |
|
|
CERTIFICATIONS EX = ATEX |
END LOCK Cylinders with protective bellow
| Ø | Stroke | WH | AM | KK | MM | P | R | DE | SW1 | SW2 |
| 32 | 0 ÷ 245 | 88 | 22 | M10x1,25 | 12 | 25 | G1/8 | 61 | 10 | 17 |
| 32 | 246 ÷ 490 | 132 | 22 | M10x1,25 | 12 | 25 | G1/8 | 61 | 10 | 17 |
| 40 | 0 ÷ 245 | 89 | 24 | M12x1,25 | 16 | 26 | G1/8 | 61 | 13 | 19 |
| 40 | 246 ÷ 490 | 133 | 24 | M12x1,25 | 16 | 26 | G1/8 | 61 | 13 | 19 |
| 50 | 0 ÷ 245 | 99 | 32 | M16x1,5 | 20 | 30 | G1/8 | 61 | 17 | 24 |
| 50 | 246 ÷ 490 | 143 | 32 | M16x1,5 | 20 | 30 | G1/8 | 61 | 17 | 24 |
| 63 | 0 ÷ 245 | 76 | 32 | M16x1,5 | 20 | 16,5 | G1/8 | 61 | 17 | 24 |
| 63 | 246 ÷ 490 | 120 | 32 | M16x1,5 | 20 | 16,5 | G1/8 | 61 | 17 | 24 |
| 80 | 0 ÷ 285 | 86 | 40 | M20x1,5 | 25 | 11,5 | G1/8 | 83 | 22 | 30 |
| 80 | 286 ÷ 570 | 139 | 40 | M20x1,5 | 25 | 11,5 | G1/8 | 83 | 22 | 30 |
| 100 | 0 ÷ 285 | 86 | 40 | M20x1,5 | 25 | 12 | G1/8 | 83 | 22 | 30 |
| 100 | 286 ÷ 570 | 139 | 40 | M20x1,5 | 25 | 12 | G1/8 | 83 | 22 | 30 |
| 125 | 0 ÷ 285 | 108 | 54 | M27x2 | 32 | 30 | G1/8 | 83 | 29 | 41 |
| 125 | 286 ÷ 570 | 161 | 54 | M27x2 | 32 | 30 | G1/8 | 83 | 29 | 41 |
1-16/21 results
