text.skipToContent text.skipToNavigation
Series QC

Series QC

Double-acting, magnetic piston, guided
ø 20, 25, 32, 40, 50, 63 mm
These actuators, suitable for use in very limited space, are available in two versions.
QCT version: with sintered bronze bushes, suitable when the side loads applied to the cylinder are high.
QCB version: with linear ball bearings, suitable for high precision and fast cycling applications.

Both versions are equipped with fixed cushioning to prevent direct impact with the end covers. The design of the cylinder body allows the mounting of the cylinder using either top, bottom or side faces. Several “T” shaped grooves in two faces allow sensors to be fitted in a number of positions.
Out of standard strokes are available on demand only.
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Type of construction compact guided
QCT = sintered bronze bushes
QCB = linear ball bearings
Operation double-acting
Materials body = anodized AL
flange = zinc-plated steel
piston rod = rolled stainless steel AISI 303
QCT columns = rolled stainless steel 420B
QCB columns = hardened steel C50
seals = PU
Mounting threaded and non-threaded holes in the body
Strokes min. max see table
Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Speed 50 ÷ 500 mm/s
Operating pressure 1 ÷ 10 bar
Fluid clean air, non lubricated.
If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Full screen
Your configuration