Israel
Soft start valves
Series MX
MX2 ports: G3/8, G1/2, G3/4 - MX3 ports: G3/4, G1
Modular
Modular
These soft start valves allow a gradual increase of the pressure in pneumatic systems. The pressure increases slowly according to the set regulation until it reaches half of the set value, then it increases rapidly. The valve poppet shifts slowly and securely to the open position to prevent sudden and unsafe movements of the pneumatic components in the system.
The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
A special configurator, available on Camozzi website at http://catalogue.camozzi.com (sec. Configurators), allows the customer to choose the most suitable solution for his application, selecting single components or by configuring assembled FRLs.
The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
A special configurator, available on Camozzi website at http://catalogue.camozzi.com (sec. Configurators), allows the customer to choose the most suitable solution for his application, selecting single components or by configuring assembled FRLs.
Download catalogueSeries
Accessories
Soft-start valve ser. mx - MX2-1/2-AV
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Construction | modular, compact, poppet-type |
| Materials | see TABLE OF MATERIALS on the following page |
| Ports | MX2: G3/8 - G1/2 - G3/4 MX3: G3/4 - G1 |
| Mounting | in-line wall-mounting (by means of clamps) |
| Operating temperature | -5°C ÷ 50°C up to 16 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) -5°C ÷ 60°C up to 10 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) |
| Operating pressure | 2 ÷ 16 bar |
| Nominal flow (at 6 bar with ∆P 1 bar) | MX2: 5800 Nl/min (G1/2, G3/4) MX2: 4500 Nl/min (G3/8) MX3: 8500 Nl/min |
| Fluid | compressed air |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
CODING EXAMPLE
For the assembly of a single component with fixing flanges or wall-mounting, see the section "FRL Series MX Assembled"
| MX | 2 | 3/8 | AV | LH |
| MX | SERIES |
| 2 |
SIZE: 2 = G3/8 - G1/2 - G3/4 3 = G3/4 - G1 |
| 3/8 |
PORT: 3/8 = G3/8 1/2 = G1/2 3/4 = G3/4 1 = G1 |
| AV | SOFT START VALVE |
| LH |
FLOW DIRECTION: = from left to right (standard) LH = from right to left |
Soft start valves Series MX - dimensions
AVP1 = soft start valve
| Mod. | A | B | C | G | I | M | R | S | T | Weight (kg) |
| MX2-3/8-AV | G3/8 | G1/8 | 70 | 65 | 68 | 46,5 | 88 | 50,5 | 37,5 | 0.4 |
| MX2-1/2-AV | G1/2 | G1/8 | 70 | 65 | 68 | 46,5 | 88 | 50,5 | 37,5 | 0.4 |
| MX2-3/4-AV | G3/4 | G1/8 | 70 | 65 | 68 | 46,5 | 88 | 50,5 | 37,5 | 0.4 |
| MX3-3/4-AV | G3/4 | G1/8 | 89,5 | 75 | 76 | 48 | 102 | 57,5 | 44,5 | 0.7 |
| MX3-1-AV | G1 | G1/8 | 89,5 | 75 | 76 | 48 | 102 | 57,5 | 44,5 | 0.7 |
