India
Direct acting solenoid valves
Series PD
2/2-way - Normally Closed (NC)
The Series PD directly operated solenoid valves are available in the 2/2-way normally closed (NC) version. Pneumatic interfaces allow installation on manifolds in horizontal or vertical position. Also available with threaded connections.
Please note that all Series PD solenoid valves are supplied with direct current (DC).
To operate in alternating current (AC), it is necessary to use the connector with bridge rectifier Mod. 125-900.
Please note that all Series PD solenoid valves are supplied with direct current (DC).
To operate in alternating current (AC), it is necessary to use the connector with bridge rectifier Mod. 125-900.
Download catalogue
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Led connector - 125-601
Connector - 125-800
Connector 2-mt. cable - 125-501-2
Connectors - 125-571-3
In-line connector 24dc 2mt. - 125-503-2
Connector in line 24dc 5mt. - 125-503-5
In-line connector v-ac 2mt. - 125-903-2
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| TECHNICAL FEATURES | |
| Function | 2/2 NC |
| Operation | Direct acting poppet type |
| Pneumatic connections | On subbase - M5 threads |
| Orifice diameter | 0.8 … 2.5 mm |
| Flow coefficient kv (l/min) | 0.39 … 1.93 |
| Operating pressure | -0.9 ÷ 4 … 12 bar |
| Operating temperature | 0 ÷ 50 °C |
| Fluid | Filtered air class [5:4:4] according to ISO 8573-1:2010 (max oil viscosity 32 cSt), inert gas - liquids (on demand) |
| Response time (ISO 12238) | <15 ms |
| Installation | In any position |
| MATERIALS IN CONTACT WITH THE MEDIUM | |
| Body | Brass - anodized aluminium - POM |
| Seals | NBR - FKM - EPDM |
| Internal parts | Stainless steel |
| ELECTRICAL FEATURES | |
| Voltage | 12 V DC - 24 V DC - other voltages on demand |
| Voltage tolerance | 1 and 2 W ±10% - 4 W ±5% |
| Power consumption | 1 … 4 W |
| Duty cycle | ED 100% (1 and 2 W) - ED 50% (4W) see the ED definition diagram |
| Electrical connection | industrial standard connector (9.4 mm) |
| Protection class | IP65 with connector |
| Special versions available on demand |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Coding example
| PD | 0 | 00 | 2 | A | 1 | R | 5 | 3 |
| PD | SERIES |
| 0 |
BODY DESIGN 0 = single body |
| 00 |
NUMBER OF POSITIONS 00 = interface |
| 2 |
NUMBER OF WAYS - FUNCTIONS 2 = 2/2-way - NC |
| A |
MATERIAL - BODY CONNECTIONS A = aluminium body - lateral interface AR = aluminium body - lateral interface - electric part revolved by 180° C = aluminium body - bottom interface CR = aluminium body - bottom interface - electric part revolved by 180° DF = POM body - bottom interface DR = POM body - bottom interface - electric part revolved by 180° E = brass body - M5 threaded ports ER = brass body - M5 threaded ports - electric part revolved by 180° |
| 1 |
ORIFICE DIAMETER 1 = Ø 0.8 mm 2 = Ø 1.2 mm 3 = Ø 1.6 mm 4 = Ø 2.0 mm 5 = Ø 2.5 mm |
| R |
SEAL MATERIAL R = NBR F = FKM E = EPDM |
| 5 |
ELECTRICAL CONNECTION 5 = industrial standard (9.4 mm) |
| 3 |
VOLTAGE - POWER CONSUMPTION 1 = 12 V DC - 1 W 2 = 12 V DC - 2 W 3 = 24 V DC - 1 W 5 = 24 V DC - 2 W 8 = 24 V DC - 4 W |
|
FIXING = with screws for metal P = with screws for plastics |
|
|
OPTIONS = standard OX1 = for use with oxygen (non volatile residual less than 550 mg/m²) OX2 = for use with oxygen (non volatile residual less than 33 mg/m²) |
1-7/7 results
