text.skipToContent text.skipToNavigation
Series PG

Series PG

Possibility of a direct mounting with rear or panel connection
The new Series PG digital pressure gauges meet the need of an even more precise pressure adjustment, above all in proportional control.
Thanks to the IP65 protection class these pressure gauges are particularly suitable for applications where the highest environmental protection is required.

Series
Accessories
8 Products found
Pressure gauge -1 bar _ - PG001-VB-1/4
Series PG
Pressure gauge -1 bar _ - PG001-VB-1/8
Series PG
Pressure gauge -1 bar _ - PG001-VB-1/8-2
Series PG
Pressure gauge -1 bar _ - PG001-VB-1/8-M
Series PG
Series PG
Series PG
Pressure gauge 0-10 bar _ - PG010-PB-1/8-2
Series PG
Pressure gauge 0-10 bar _ - PG010-PB-1/8-M
Series PG
Vacuum PG...-VB Pressure PG...-VB
Pressure units psi, bar, mmHg, kPa
programmable by the user
psi, bar, kgf/cm², MPa
programmable by the user
Rated pressure range 0 ÷ -1 bar 0 ÷ 10 bar
Display pressure range 0.1 ÷ -1 bar -0.1 ÷ 10 bar
Withstand pressure 3 bar 15 bar
Repeatability ≤ ± 1% F.S. ± 1 digit ≤ ± 0,2% F.S. ± 1 digit
Resolution
  kPa 1 -
  MPa - 0.001
  kgf/cm² 0.01 0.01
  bar 0.01 0.01
  psi 0.1 0.1
Indicator accuracy ≤ ± 2% F.S. ± 1 digit (ambient temperature: 25 ± 3°C)
Medium Filtered air, incombustible and non-corrosive gases
Back light Yes
Sample rate 2 Hz (2 times/second)
LCD display 3 ½ digit, 7 segment
ENVIRONMENT
Protection class IP65 (an air tube must be installed to maintain this grade)
Temperature Operation: 0 ÷ 50°C
Storage: -10 ÷ 60°C
(no condensation or freezing)
Relative humidity Operation/storage: 35 ÷ 85% RH
(no condensation)
Vibrations Total amplitude 1.5mm or 10G
10Hz-55Hz-10Hz scan for 1 minute
2 hours for each direction of X, Y and Z
Shock 100 m/s² (10G)
3 times for each direction of X, Y and Z
Changes due to temperature ≤ ± 2% F.S. of detected pressure (25°C) within the operating temperature range
Pneumatic connections ports G1/4 - M5 or G1/8 - M5
FOR BATTERY-POWERED PRESSURE GAUGES ONLY
Battery type CR 2032 lithium
Life 1 year (5 times/day)
Low-power indicator Yes
Replacement Yes
Turn-on interval Display turns off after 60 seconds
FOR PRESSURE GAUGES WITH POWER SUPPLY CABLE ONLY
Supply voltage from 12 to 28 V DC±10% Ripple
Power consumption 10 mA
Maximum voltage 1000V AC in 1-min (between the casing and the cables)
Isolation resistance 50 Mohm min (at 500 V DC, between the casing and the cables)
Electrical connection
for pressure gauges PG…-2 Unshielded 2-pole cable, length 2 m
for pressure gauges PG…-M Connection with M8 4-pole connector
Full screen
Your configuration
Coding example
PG 010 P B 1/8 2
PG SERIES
010 BOTTOM SCALE
010 = 10 bar
001 = -1 bar
P PRESSURE RANGE
P = pressure
V = vacuum
B LIGHTING
B = back light
1/8 PNEUMATIC CONNECTIONS
1/8 = G 1/8 BSPP; M5
1/4 = G 1/4 BSPP; M5 (for battery-powered version only)
2 ELECTRICAL CONNECTION (for version with cable only):
2 = with unshielded 2-pole cable of 2 m
M = with cable of 150 mm and M8 4-pole connector
We think you are in United States.
Update your location?