马来西亚
样本下载Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
.jpg "型 R")
.jpg "Mod. C")
.jpg "C-H...")
.jpg "H...")
.jpg "Mod. D-E")
Center trunnion - FN-100
Center trunnion - FN-125
Center trunnion - FN-50
Center trunnion - FN-63
End cap trunnion ser. 63 - FN-80
Kit actuator - F-63-100
Kit actuator - F-63-125
Kit actuator - F-63-32
Kit actuator - F-63-50
Kit actuator - F-63-63
Kit actuator - F-63-80
Accessory kit movement _ - DC-63-100
Accessory kit movement _ - DC-63-125
Accessory kit movement _ - DC-63-32
Accessory kit movement _ - DC-63-50
Accessory kit movement _ - DC-63-63
Accessory kit movement _ - DC-63-80
Mounting plate kit - PCV-62-K3
Mounting plate kit - PCV-62-K4
Mounting plate kit - PCV-62-K8
Mounting plate kit - PCV-62-KEN
添加的数量:
addtocart.popup.message.success
请求的数量已部分确认
产品 {0} 已在您的购物车中，数量为 {1} 。您可以从购物车页面更新数量
产品未激活
由于库存不足，无法将此产品添加到购物车
数量必须大于零
产品 {0} 允许的最小数量为 {1}
产品 {0} 允许的最大数量为 {1}
产品 {0} 的包装尺寸是 {1}
无法将代码 {0} 的产品添加到此购物车
出现错误，请稍后重试或联系客户支持
全屏
添加的数量:
addtocart.popup.message.success
请求的数量已部分确认
产品 {0} 已在您的购物车中，数量为 {1} 。您可以从购物车页面更新数量
产品未激活
由于库存不足，无法将此产品添加到购物车
数量必须大于零
产品 {0} 允许的最小数量为 {1}
产品 {0} 允许的最大数量为 {1}
产品 {0} 的包装尺寸是 {1}
无法将代码 {0} 的产品添加到此购物车
出现错误，请稍后重试或联系客户支持
CODING EXAMPLE
* Only for low friction
| 63 | M | P | 2 | C | 050 | A | 0200 | W |
| 63 | 系列 | |
| M |
VERSION: M = standard, magnetic V = uniform movement (no stick slip), magnetic L = low friction, magnetic |
|
| P |
CONSTRUCTION: T = round tube P = profile |
|
| 2 |
OPERATION: 1 = single-acting, front spring 2 = double-acting 6 = double-acting, through-rod 7 = single-acting, through-rod 9 = single-acting, rear spring |
PNEUMATIC SYMBOLS: CS07/CS18 CD08 - CD09 - CD10 - CD11 CD13 CS11 CS14/CS17 |
| C |
CUSHIONING: N = no cushioning (mechanical endstops) C = cushioning on both sides F = front cushioning R = rear cushioning |
PNEUMATIC SYMBOLS: CD08 CD09/CD13 CD11 CD10 |
| 050 |
孔径: 032 = 32 mm 040 = 40 mm 050 = 50 mm 063 = 63 mm 080 = 80 mm 100 = 100 mm 125 = 125 mm |
080 = 80 mm 100 = 100 mm 125 = 125 mm |
| A |
CONSTRUCTIVE TYPE: A = standard with rod nut RL = cylinder with rod lock |
DC = back to back cylinder with DC accessory [X1/X2] TR = back to back cylinder for round tube [X1/X2] F = cylinder with centre trunnion |
| 0200 |
STROKE: = standard N = tandem / = more positions X1/X2 [X1
|
|
| W |
TEMPERATURE RANGE: = standard (-20°/+80°) W = high temperatures (150°C) |
Z = low temperatures (-40°C) Y = low temperatures (-50°C) |
|
RESISTANCE TO CORROSION: = standard C1 = rod nut AISI 304 stainless steel, rod AISI 304 stainless steel C2 = end cap treated screws (profile) or AISI 303 tie-rods and AISI 420B tie-rods (round tube) |
C3 = C2 + AISI 316 rod nut, AISI 316 rod C4 = C1 + C2 C5 = C3 + end caps with triple protection |
|
|
ROD VARIATIONS: = standard (male rod thread) F = female rod thread K = end caps with Kanigen treatment (only for corrosion resistance category C2, C3 and C4) L = without rod seal (rear air inlet only)* V = FKM rod seal R = NBR rod seal U = unlubricated operation |
H = hydrolytic environment A = use in food and other frequent washdown applications G = dry and dusty environments (with brass rod scraper and chrome-plated stainless steel AISI 420B rod) B = cylinder with NBR bellow rod protection (_ _ _) = extended rod _ _ _ mm |
|
|
OTHER: P = cylinder with RAL 7035 polyurethane coating |
||
|
认证： EX = ATEX |
Series 63 cylinders - round tube, tandem version
+ = 增加行程
| 公称直径 ø | EE | L2 ++ | L3 ++ |
| 32 | G1/8 | 171,5 | 197,5 |
| 40 | G1/4 | 191,5 | 221,5 |
| 50 | G1/4 | 188 | 225 |
| 63 | G3/8 | 204 | 241 |
| 80 | G3/8 | 225,5 | 271,5 |
| 100 | G1/2 | 231 | 282 |
| 125 | G1/2 | 264 | 329 |
