Silencers in 316L stainless steel
Silencers
Silencers are indispensable elements for eliminating or reducing the characteristic noise of compressed air during discharge into the atmosphere. They should always be placed on the outlets of 3/2-, 5/2- or 5/3-way valves. When carrying out maintenance, silencers should be degreased using white spirit or paraffin and compressed air blown through them in the opposite direction to the direction of operation.
Flow rate: is measured at an inlet pressure of 6 bar with exhaust in the atmosphere. Noise level: is measured through a test using a phonometer. Placing the phonometer one meter away from the application and at the same height for ten seconds, gives an average reading of the noise generated.
Flow rate: is measured at an inlet pressure of 6 bar with exhaust in the atmosphere. Noise level: is measured through a test using a phonometer. Placing the phonometer one meter away from the application and at the same height for ten seconds, gives an average reading of the noise generated.
Series
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
![](https://media.camozzi.com/Shop/login/done.png)
![](https://media.camozzi.com/Shop/login/error.png)
addtocart.popup.message.success
请求的数量已部分确认
产品 {0} 已在您的购物车中,数量为 {1} 。您可以从购物车页面更新数量
产品未激活
由于库存不足,无法将此产品添加到购物车
数量必须大于零
产品 {0} 允许的最小数量为 {1}
产品 {0} 允许的最大数量为 {1}
产品 {0} 的包装尺寸是 {1}
无法将代码 {0} 的产品添加到此购物车
出现错误,请稍后重试或联系客户支持
结构形式 | body with male thread |
材料 | 316L stainless steel |
连接螺纹 | G1/8, G1/4, G3/8, G1/2, G3/4, G1 1/8NPT , 1/4NPT , 3/8NPT , 1/2NPT , 3/4NPT , 1NPT |
型号 | D | H | L | SW | 最大工作压力 (bar) | 公称流量(Nl/min) | 噪声限值 db (A) |
X2901 1/8 | G1/8 | 8 | 15 | 14 | 10 | 700 | 76 |
X2901 1/4 | G1/4 | 8 | 14 | 17 | 10 | 1000 | 78 |
X2901 3/8 | G3/8 | 10 | 18 | 22 | 10 | 1500 | 76 |
X2901 1/2 | G1/2 | 12 | 22 | 27 | 10 | 3400 | 86 |
X2901 3/4 | G3/4 | 15 | 27 | 32 | 6 | 4100 | 87 |
X2901 1 | G1 | 18 | 34 | 41 | 6 | 7600 | 88 |
X2901 1/8PT | 1/8 NPT | 7 | 14 | 14 | 10 | 700 | 76 |
X2901 1/4PT | 1/4 NPT | 11 | 17 | 17 | 10 | 1000 | 78 |
X2901 3/8PT | 3/8 NPT | 11 | 19 | 22 | 10 | 1500 | 76 |
X2901 1/2PT | 1/2 NPT | 15 | 25 | 27 | 10 | 3400 | 86 |
X2901 3/4PT | 3/4 NPT | 16 | 28 | 32 | 6 | 4100 | 87 |
X2901 1PT | 1 NPT | 19 | 35 | 41 | 6 | 7600 | 88 |