Netherlands
Cylinders (single flange)
Series QX
NOTE: for out of standard intermediate strokes (ex. stroke 37), you have to consider the dimensions referring to the immediately higher stroke (ex. stroke 40) with a maximum permitted reduction of 10 mm.
Download catalogueSeries
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Coding example
| QX | T | 2 | A | 020 | A | 050 |
| QX | SERIES | |
| T |
VERSION T = sintered bronze bushes B = linear ball bearings |
|
| 2 |
OPERATION 2 = double-acting (1 flange) radial / axial pressure supply 3 = double-acting through-rod (double-flange), radial pressure supply |
PNEUMATIC SYMBOLS CD15 CD16 |
| A |
MATERIALS A = anodized aluminium body, rolled stainless steel AISI 303 (QXT) or hardened steel C50 (QXB) piston rod |
|
| 020 |
BORE 010 = 10 mm - 016 = 16 mm - 020 = 20 mm - 025 = 25 mm - 032 = 32 mm |
|
| A |
TYPE OF DESIGN A = standard |
|
| 050 | STROKE (see the table) |
Cylinders Series QX (single flange)
NOTE: for out of standard intermediate strokes (ex. stroke 37), you have to consider the dimensions referring to the immediately higher stroke (ex. stroke 40) with a maximum permitted reduction of 10 mm.
+ = add the stroke
Dimensions for Series QX with single flange
+ = add the stroke
+ = add the stroke
| Stroke (mm) | Ø 10 | Ø 16 | Ø 20 | Ø 25 | Ø 32 | |
| A | 42 | 58 | 62 | 76 | 94 | |
| B | 16 | 21 | 25 | 30 | 37 | |
| C | 40 | 56 | 60 | 71 | 92 | |
| E | 13 | 19 | 22 | 27 | 35 | |
| F | 33 | 42 | 50 | 60 | 75 | |
| G | 4 | 5 | 6 | 6 | 8 | |
| I | 3,5 | 2,5 | 4,5 | 4,5 | 4 | |
| M | 8 | 10 | 12 | 12 | 16 | |
| Q | 9 | 11 | 16 | 16 | 16 | |
| R | 13 | 13 | 18 | 18 | 18 | |
| L1+ | 48 | 57,5 | 67,5 | 70,5 | 80,5 | |
| L2+ | 59,5 | 70 | 84 | 87 | 100,5 | |
| L3 | 32,1 | 34 | 39,5 | 44,0 | 46,5 | |
| L4 | 8,5 | 8,5 | 9 | 8,5 | 12 | |
| L5 | 16 | 20 | 25 | 30 | 30 | |
| L6 | 10 | 18 | 25 | 30 | 30 | 40 |
| L6 | 20 | 28 | 25 | 30 | 30 | 40 |
| L6 | 30 | 38 | 35 | 40 | 40 | 50 |
| L6 | 40 | 48 | 35 | 40 | 40 | 50 |
| L6 | 50 | 58 | 35 | 40 | 40 | 50 |
| L6 | 75 | 83 | 45 | 60 | 60 | 70 |
| L6 | 100 | - | 55 | 60 | 60 | 70 |
| L7 | 13 | 13 | 20 | 20 | 20 | |
| L8 | 16 | 30 | 30 | 30 | 30 | |
| L9 | 10 | 22 | 25 | 30 | 30 | 40 |
| L9 | 20 | 32 | 25 | 30 | 30 | 40 |
| L9 | 30 | 42 | 35 | 40 | 40 | 50 |
| L9 | 40 | 52 | 35 | 40 | 40 | 50 |
| L9 | 50 | 62 | 35 | 40 | 40 | 50 |
| L9 | 75 | 87 | 45 | 60 | 60 | 70 |
| L9 | 100 | - | 55 | 60 | 60 | 70 |
| L10 | 20,5 | 29 | 31 | 38 | 47 | |
| L11 | 31 | 52 | 57,2 | 71,5 | 47 | |
| H2 | 3,5 | 4,5 | 5,5 | 6,5 | 6,5 | |
| H3 | 2,5 | 4,0 | 4,0 | 4,0 | 4,0 | |
| H4 | 4,0 | 5,0 | 4,5 | 5,0 | 7,5 | |
| H5 | 6,5 | 6,0 | 6,0 | 6,0 | 7,5 | |
| H6 | 8,0 | 6,0 | 8,0 | 8,0 | 8,0 | |
| H7 | 3,0 | 3,0 | 4,0 | 4,0 | 4,0 | |
| H8 | 6,3 | - | - | - | - | |
| H10 | 6,5 | 10,5 | 10,5 | 15 | 8,5 | |
| H11 | 8 | 16,5 | 20,2 | 21,5 | 28,5 | |
| H12 | 4 | 10,5 | 8,00 | 8,5 | 8,5 | |
| H13 | 8 | - | 9,0 | 13,0 | 20,0 | |
| H14 | 8 | 5,5 | 12,5 | 15,0 | 18,5 | |
| D1 | M4 | M5 | M6 | M8 | M8 | |
| D2 | 6 | 7,5 | 9,5 | 10,5 | 10,5 | |
| D3 | 2,5 | 2,5 | 4 | 4 | 4 | |
| D4 | M3 | M3 | M4 | M5 | M5 | |
| D5 | M3 | M4 | M4 | M5 | M5 | |
| D6 | M3 | M3 | M4 | M4 | M4 | |
| D7 | 2,5 | 2,5 | 4,0 | 4,0 | 4,0 | |
| D8 | 6,0 | - | - | - | - | |
| D9 | 3,5 | - | - | - | - | |
| D10 | M4 | M5 | M5 | M6 | M6 | |
| NN | 6 | 8 | 10 | 12 | 16 | |
| EE | M5 | M5 | M5 | M5 | G1/8 | |
| J | 4,3 | - | - | - | - | |
| K | 7 | 7 | 8 | 8 | 10 | |
| P | 20 | 25 | 29 | 35 | 45 |
1-6/6 results
