text.skipToContent text.skipToNavigation
Series K8P

Series K8P

Proportional regulator for the pressure control
Series K8P electronic proportional micro regulators have evolved from our Series K8 mini-solenoid valves. Series K8P regulators guarantee excellent pressure regulation, fast response times, self-regulation and low energy consumption.
Series K8P is a high performance proportional pressure regulator which is suitable for use in all applications where high precision, quick response times and low consumption are required.

The K8P regulator adjusts the outlet pressure through the operation of two K8 monostable valves according to the inlet signal and to the retroactivity of the internal pressure sensor.
A self-adjusting function has been integrated into the regulator control algorithm to guarantee the highest levels of performance apart from the volume connected.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Fluids filtered compressed air, unlubricated, according to ISO 8573-1 class 7.4.4,
oxygen, inert gases (argon, molecular nitrogen)
Pressures Regulated pressure
0,5 ÷ 10 bar
0,15 ÷ 3 bar
0,35 ÷ 7 bar
0,05 ÷ 1 bar

Max inlet pressure
11 bar
4 bar
8 bar
1,5 bar
Working temperature 0 ÷ 50°C
Analogical input 0-10 V DC 4-20 mA Ripple ≤ 0,2%
Analogical output 0,5 - 9,5 V [ Feedback ]
Analog input impedance 20.000 Ω for versions 0-10 V
250 Ω for versions 4-20 mA
Maximum flow 12 l/min with regulated pressure = 6 bar (IN Pres. 10 bar)
6 l/min with regulated pressure = 3 bar (IN Pres. 4 bar)
8 l/min with regulated pressure = 7 bar (IN Pres. 8 bar)
2 l/min with regulated pressure = 1 bar (IN Pres. 1,5 bar)
Supply / Use 24 V - ~ 1 W
Function 3/2 NC
Linearity ≤ ±1% FS
Hysteresis ±0,5% FS
Resolution ±0,5% FS (referred to the command signal)
Repeatability ±0,5% FS
Minimal set point change 50 mV => 50 mB (10 bar)
100 mV => 30 mB (3 bar)
Electrical connection M8 4 Pin (Male)
Protection class IP65 (with standard sub-base or with single use)
IP51 (with Light sub-base and Light Sub-base for the pressure remote reading)
In compliance with the European Directive 2004/108/EC
Full screen
Your configuration
CODING EXAMPLE
K8P - 0 - D 5 2 2 - 0 OX1
K8P SERIES
0 BODY DESIGN:
0 = Stand alone
S = Standard Sub-base
L = Light Sub-base
T = Light Sub-base for the pressure remote reading
D WORKING PRESSURE:
D = 0 - 10 bar
E = 0 - 3 bar
F = 0 - 7 bar
B = 0 - 1 bar
5 VALVE FUNCTIONS:
5 = 3/2-way NC
2 COMMAND:
2 = 0-10 V DC
3 = 4-20 mA
2 OUTPUT SIGNAL:
2 = 0-10 V
0 CABLE LENGTH:
0 = without cable
2F = straight cable, 2 m
2R = right angle cable (90 degrees), 2 m
5F = straight cable, 5 m
5R = right angle cable (90 degrees), 5 m
OX1 VERSIONS:
= standard
OX1 = for use with oxygen (in compliance with ASTM G93-03 Level E)

APPLICATIONS

The K8P proportional regulator can be used as a pilot valve to control the opening of high flow valves or to check the high flow pressure regulators proportionally (version with sub-base for the pressure remote reading).
It enables proportional control of power in lifting systems and can be used with inert gas to maintain a constant pressure in pneumatic cylinders or expansion valve chambers.
It has also been designed to maintain a constant pressure during the pulling power applied to the wires in winding machines, to modulate pressure during the smoothing process in woodworking machines or to adjust the opening of diaphragm valves.

Series K8P electronic proportional micro regulator

M8 4-POLE MALE CONNECTOR

Pin 1: +24 V DC (Power supply)
Pin 2: Command analogical signal 0-10 V DC or 4-20 mA
Pin 3: 0 V (Ground) common also for the command signal
Pin 4: Output analogical signal (according to the regulated pressure)

5 Red LED
6 Green LED



Mod. Working pressure Use with oyxgen Command
K8P-*-D522-** 0-10 bar no 0-10 V DC
K8P-*-E522-** 0-3 bar no 0-10 V DC
K8P-*-D532-** 0-10 bar no 4-20 mA
K8P-*-E532-** 0-3 bar no 4-20 mA
K8P-*-B522-** 0-1 bar no 0-10 V DC
K8P-*-F522-** 0-7 bar no 0-10 V DC
K8P-*-B532-** 0-1 bar no 4-20 mA
K8P-*-F532-** 0-7 bar no 4-20 mA
K8P-*-B522-**OX1 0-1 bar yes 0-10 V DC
K8P-*-F522-**OX1 0-7 bar yes 0-10 V DC
K8P-*-E522-**OX1 0-3 bar yes 0-10 V DC
K8P-*-B532-**OX1 0-1 bar yes 4-20 mA
K8P-*-F532-**OX1 0-7 bar yes 4-20 mA
K8P-*-E532-**OX1 0-3 bar yes 4-20 mA
* = sub-bases and single use can be supplied for all versions
** = all the cables can be supplied for all versions

We think you are in United States.
Update your location?