Soft start valves
Series MD
Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular assembly
Modular assembly
The soft start valves are used to avoid the sudden movement of pneumatic actuators.
Feeding them pneumatically is enough to begin the phase of the pressure gradual increase in the system. By means of a regulation screw, it is possible to determine the time the valve needs to reach the 50% of the inlet pressure. Once this value is reached, the valve opens completely the passage.
The blanked connection on the upper side allows either the time increase to fill the system through a small additional volume or the connection of a pressure switch.
Feeding them pneumatically is enough to begin the phase of the pressure gradual increase in the system. By means of a regulation screw, it is possible to determine the time the valve needs to reach the 50% of the inlet pressure. Once this value is reached, the valve opens completely the passage.
The blanked connection on the upper side allows either the time increase to fill the system through a small additional volume or the connection of a pressure switch.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
there are no salable codes online
Look in the "Accessory" tab for the Configurator
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Construction | modular, compact, poppet-type |
Materials | see TABLE OF MATERIALS on the following page |
Ports | with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded, integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm |
Fixing | in-line; wall-mounting by means of through hole in the body or with a support bracket |
Operating temperature | -5°C ÷ 50°C |
Operating pressure | 2 ÷ 10 bar |
Nominal flow (at 6 bar with ∆P 1 bar) | MD1-AV-1/8 = 1000 Nl/min MD1-AV-1/4 = 1350 Nl/min MD1-AV-3/8 = 1500 Nl/min |
Fluid | compressed air |
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
CODING EXAMPLE
MD | 1 | AV | 1/8 |
MD | SERIES |
1 |
DIMENSION: 1 = 42 mm |
AV | SOFT START VALVE |
1/8 |
PORTS (IN - OUT)*: = without cartridges 1/8 = G1/8 1/4 = G1/4 3/8 = G3/8 6 = tube Ø6 8 = tube Ø8 10 = tube Ø10 * NOTE: if the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated. Example: MD1-AV-1/4-1/8 |
Mod. | A | B | C | E | F | H | I | L | N | O | P | S | T | V | Weight (kg) |
MD1-AV | - | G1/8 | 42 | 42 | G1/8 | 26,2 | 43 | Ø4 | 53,2 | 2,5 | 22,7 | 27 | 34,6 | 10,5 | 0,2 |
MD1-AV-1/8 | G1/8 | G1/8 | 42 | 42 | G1/8 | 26,2 | 43 | Ø4 | 53,2 | 2,5 | 22,7 | 27 | 34,6 | 10,5 | 0,2 |
MD1-AV-1/4 | G1/4 | G1/8 | 42 | 42 | G1/8 | 26,2 | 43 | Ø4 | 53,2 | 2,5 | 22,7 | 27 | 34,6 | 10,5 | 0,2 |
MD1-AV-3/8 | G3/8 | G1/8 | 42 | 42 | G1/8 | 26,2 | 43 | Ø4 | 53,2 | 2,5 | 22,7 | 27 | 34,6 | 10,5 | 0,2 |
MD1-AV-6 | Ø6 | G1/8 | 47 | 42 | G1/8 | 26,2 | 43 | Ø4 | 53,2 | 2,5 | 22,7 | 27 | 34,6 | 10,5 | 0,2 |
MD1-AV-8 | Ø8 | G1/8 | 62 | 42 | G1/8 | 26,2 | 43 | Ø4 | 53,2 | 2,5 | 22,7 | 27 | 34,6 | 10,5 | 0,2 |
MD1-AV-10 | Ø10 | G1/8 | 67 | 42 | G1/8 | 26,2 | 43 | Ø4 | 53,2 | 2,5 | 22,7 | 27 | 34,6 | 10,5 | 0,2 |