Belgium
Valve islands, Size 5, Multipole and Fieldbus
Series D5
Fieldbus connection with the most common communication protocols
PROFIBUS-DP, PROFINET, CANopen , EtherNET/IP , EtherCAT and IO-Link
Multipole connection with 25 or 44 pins
Valve functions: 2x3/2; 5/2; 5/3 CC, CO, CP
PROFIBUS-DP, PROFINET, CANopen , EtherNET/IP , EtherCAT and IO-Link
Multipole connection with 25 or 44 pins
Valve functions: 2x3/2; 5/2; 5/3 CC, CO, CP
In this configuration, Series D1 and D2 valves (size 10 and 16 mm) can be combined into one unique Island. Some benefits of this version are the small dimensions, only one Multipole or Serial connection point, easy installation and the possibility to have different flow rates.
All size D2 components of this configuration remain unvaried, while for size D1 a longer subbase is used.
All electric and pneumatic components and characteristics of the single versions remain unvaried.
The COILVISION function is included also in this version.
All size D2 components of this configuration remain unvaried, while for size D1 a longer subbase is used.
All electric and pneumatic components and characteristics of the single versions remain unvaried.
The COILVISION function is included also in this version.
Download catalogue
Series
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| PNEUMATIC SECTION | |
| Valve construction | Spool with seals |
| Valve functions | 5/2 monostable and bistable 5/3 CC; CO; CP 2x3/2 NC 2x3/2 NO 1x3/2 NC + 1x3/2 NO |
| Materials | spool: AL spool seals: HNBR other seals: NBR body: AL end caps: polymer subbase size 1: polymer |
| Connections | size 10,5: tube Ø 4, tube Ø 6 size 16: tube Ø 6, tube Ø 8, tube Ø 10 supply 1: tube Ø 10, tube Ø 12, tube Ø 14 supply 12/14: tube Ø 4 exhaust 3 and 5: tube Ø 10, tube Ø 12, tube Ø 14 exhaust 82/84: tube Ø 4 |
| Temperature | 0 ÷ 50°C |
| Air characteristics | Compressed, filtered and non-lubricated air in class [7:4:4] according to ISO 8573-1:2010. In case lubrication should be necessary, only use oils with a maximum viscosity of 32 Cst and the version with external servo-pilot supply. The air quality of the servo-pilot supply must be of class [7:4:4] according to ISO 8573-1:2010 (do not lubricate). |
| Valve sizes | 5 = 10,5 and 16 mm |
| Operating pressure | -0,9 ÷ 10 bar |
| Pilot pressure | 3 ÷ 7 bar 4,5 ÷ 7 bar (with operating pressure exceeding 6 bar for the version 2x3/2) |
| External pilot pressure | See graphs |
| Flow rate | 10,5 mm = 250 Nl/min 16 mm = 950 Nl/min |
| Mounting position | Any position |
| Protection class | IP65 |
| ELECTRICAL SECTION MULTIPOLE VERSION |
|
| Type of Sub-D connector | 25 or 44 pins |
| Max. absorption | 0.8 A (with Sub-D connector 25 pins) 1,5 A (with Sub-D connector 44 pins) |
| Supply voltage | 24V DC +/- 10% |
| Max. number of coils to operate | 22 on 11 valve positions (with Sub-D connector 25 pins) 38 on 19 valve positions (with Sub-D connector 44 pins) |
| Signalling LED | Multipole: green LED - presence of power - red LED - anomaly Valve: yellow LED - presence of power - blinking yellow LED - operating fault |
| ELECTRICAL SECTION FIELDBUS VERSION |
|
| General data |
See multi-serial modules |
| Max. absorption | 2.5 A |
| Supply voltage | 24 V DC +/-10% logic supply 24 V DC +/-10% power supply |
| Max. number of coils to operate | 128 on 64 valve positions |
| Max. number of digital inputs | 128 |
| Max. number of analog inputs | 16 |
| Max. number of digital outputs | 128 |
| Max. number of analog outputs | 16 |
| IO-LINK version | |
| Max n° of coils to operate | 64 on 32 valve positions |
| Input and Output | No |
| Type of port | Class B |
| IODD Configuration file (The IO-Link module on the valve island is auto-configured to operate with the right IODD) |
Up to 12, 24 or 32 valve positions per island |
Full screen
