Construction	Balanced spool type
Valve functions	5/2 - 5/3-way CC CO CP
Materials	AL body, spool base, polyamide endcovers, NBR seals
Mounting	By means of screws on the base
Ports	On sub-base
Operating temperature	0° C min. +50° C max
Fluid	Filtered air (5 micron or less), without lubrication. If lubricated air is used, it is recommended to use ISOVG32 oil. Once applied the lubrication should never be interrupted.
Size	26 mm 18 mm
Installation	In any position
Operating pressure	P. max 7 bar
Nominal pressure	6 bar
Nominal flow	Qn Size 26 mm = 900 Nl/min Qn Size 18 mm = 450 Nl/min
Voltage	See Coding example
Voltage tolerance	± 10%
Power consumption	2W
Class of insulation	Class F
Protection	IP54 (IP65 with connector DIN 40050)

7	SERIES
5	NUMBER OF WAYS - POSITIONS 5 = 5/2 6 = 5/3 CC 7 = 5/3 CO 8 = 5/3 CP
1	SIZES 1 = size 26 mm 2 = size 18 mm
N	SUBBASE N = sub-base with front outlets
1	PORTS 1 = G1/4 (Size 26 mm) 2 = G1/8 (Size 18 mm)
A	NUMBER OF SUBBASES A = 1 * B = 2 * C = 3 * D = 4 * E = 5 * F = 6 * G = 7 * H = 8 * K = 9 * L = 10 * M = 11 * N = 12 * P = 13 * R = 14 * S = 15 *
P16	ACTUATION 33 = pneumatic, bistable 36 = pneumatic, monostable P11 = electro-pneumatic, bistable P16 = electro-pneumatic, monostable
15	SOLENOID INTERFACE 15 = 15x15
W	SOLENOID TYPES W = Series W (24V - 48V DC only) P = Series P **
2	CONNECTION 1 = wire 300 mm (Series W, 24V DC only) 2 = 2 pins (Series W, 24V - 48V DC) 5 = 2 pins+earth (Series P)
3	SOLENOID VOLTAGE 3 = 24V DC 4 = 48V DC 6 = 110V DC (with Series P solenoids only) B = 24V 50/60 Hz (with Series P solenoids only) C = 48V 50/60 Hz (with Series P solenoids only) D = 110V 50/60 Hz (with Series P solenoids only) **
	* complete with the two end blocks ** on request

Valves and solenoid valves (ISO 15407-1)

Series 7