中国
样本下载
| FP2V-MQR | F | P | 2 | V | - | M | Q | R | FA2T-S | F | A | 2 | T | - | S |
| 电磁阀及过渡块备件代号 |
CODING EXAMPLE OF INTERMEDIATE PLATES |
||
| FP2V-MQR | FP2V-WQ | ||
| F | 系列 | F | Series |
| P |
类型 P = 气动 |
P |
Type: P = pneumatic |
| 2 |
规格 1 = 12 mm 2 = 14 mm |
2 |
Size: 1 = 12 mm 2 = 14 mm |
| V | 电磁阀和过渡块 | V | Solenoid valve or additional plate |
| M |
类型 M = 5/2 单稳式 B = 5/2 双稳式 C = 2 x 3/2 NC A = 2 x 3/2 NO G = 3/2 NC + 3/2 NO E = 2 x 2/2 NC F = 2 x 2/2 NO I = 2/2 NC + 2/2 NO V = 5/3 中封 L = 空阀位 X = 辅助进气和排气过渡块 T = 辅助进气和排气过渡块（分隔进气口 1 和排气口 3/5） U = 辅助进气和排气过渡块（分隔进气口 1） K = 辅助进气和排气过渡块（分隔排气口 3/5） |
W |
Type of function: L = free position W = free position with bistable board Z = free position with monostable board X = supplementary power supply and exhaust T = separated power supply and exhaust U = separated power supply and supplementary exhaust K = supplementary power supply and separated exhaust |
| Q |
管接头外径 = 无 Q = Ø4 快插管接头 R = Ø6 快插管接头 S = Ø8 快插管接头（仅限规格 2） |
Q |
Cartridges for plates: Q = Ø4 R = Ø6 S = Ø8 (not for Size 1) L = free position (no cartridges) W = free position with bistable board (no cartridges) Z = free position with monostable board (no cartridges) |
| R |
手控装置类型 = 无 R = 按钮 / 旋转式（双稳式） P = 按钮式（单稳式） |
||
|
|
|||
| 左终端块备件代号 | 右终端块备件代号 | ||
| FA2T-S | FA2T-AR | ||
| F | 系列 | F | 系列 |
| A | 附件 | A | 附件 |
| 2 |
规格 1 = 12 mm 2 = 14 mm |
2 |
规格 1 = 12 mm 2 = 14 mm |
| T |
类型 T = 左终端块 |
T |
类型 T = 右终端块 |
| S |
管接头外径 S = Ø8 快插管接头 T = Ø10 快插管接头 |
A |
先导类型 A = 内先导 B = 外先导 |
| R |
管接头外径 R = Ø6 快插管接头 |
Sub-D adaptor module 25 pin Mod. CXA-25P
It is an Expansion module of the subnet and can be connected to all valve islands with Sub-D 25 pin connection. It can manage up to a maximum of 24 Output. It has its own M12 A 4 pin male connection for the supply of the valves connected, distinguishing both logic supply and power supply and two M12 D 4 pin female connections for the Bus-IN and Bus-OUT of the subnet. The subnet can have a length of maximum 100 metres. The power of a single Output is 3 W to 24 V DC. Thanks to the PWM technique it is possible to set a power reduction to only maintain operation.
Led 1 = Yellow LNK1
Led 2 = Yellow LNK2
Led 3 = Green PWR, supply present and OK
Led 1 = Yellow LNK1
Led 2 = Yellow LNK2
Led 3 = Green PWR, supply present and OK
| 型号 | 接口 | Digital Outs | Bus-IN connection | Bus-OUT connection | PWR connection | Supply | Power for every Output |
| CXA-25P | Sub-D 25 pin | 24 | M12D 4 pin female | M12D 4 pin female | M12A 4 pin male | 24 V DC | 3 W |
