text.skipToContent text.skipToNavigation
Series 31

Series 31

Double-acting, magnetic
Ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm
The compact dimensions allow Series 31 cylinders to be installed within very small spaces. These cylinders are suitable for use with feet, flange and trunnion mountings.

In order to complete the compact cylinder series, two new versions have been introduced: tandem and multi-position. The new Tandem version with 2, 3 or 4 stages generates a thrust force which is 2, 3 or 4 times that of the normal cylinder (standard traction force).
The Multi-position version allows a maximum of 3 different positions which are determined by the stroke of the individual actuators.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Type of construction compact profile
Operation double-acting
Materials AL body and end-blocks - rolled stainless steel AISI 303 rod - AL piston - PU rod and piston seals
Mounting flange - feet - trunnion
Min and max strokes (for tandem 31M and 31F) Ø12÷25 = 1÷80 mm
Ø32÷100 = 1÷100 mm
Min and max strokes (for multi-position 31M and 31F) Ø12÷25 = dimension for X2 max 200 mm
Ø32÷63 = dimension for X2 max 300 mm
Ø80÷100 = dimension for X2 max 400 mm
Operating temperature 0°C ÷ 80°C (with dry air -20°C)
Operating pressure 1 ÷ 10 bar
Medium filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.
Speed 10 ÷ 1000 mm/sec (without load)
CODING EXAMPLE
31 M 2 A 032 A 050 N 2
31 SERIES
M VERSION
M = male rod thread, mounted with rod nut Mod. U
F = female rod thread
2 OPERATION
2 = double-acting
PNEUMATIC SYMBOLS
CDPP
A MATERIALS
A = rolled stainless steel rod AISI 303 - AL tube profile
032 BORE
012 = 12 mm - 016 = 16 mm - 020 = 20 mm - 025 = 25 mm
032 = 32 mm - 040 = 40 mm - 050 = 50 mm - 063 = 63 mm
080 = 80 mm - 100 = 100 mm
CD5T, CD6T, CD7T
CD2T, CD3T, CD4T
CD2T, CD3T, CD4T
A CONSTRUCTION TYPE
A = standard
050 STROKE
tandem stroke (mm)
multi-position X1mm/X2mm.
Insert stroke without the initial 0 (see application scheme).
N TANDEM AND MULTI-POSITION
2 STAGES (only for tandem)
2 = 2 stages
3 = 3 stages
4 = 4 stages
We think you are in United States.
Update your location?