text.skipToContent text.skipToNavigation
Series 32

Series 32

Single and double-acting, non-rotating, auto-cushioned
ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 mm
Series 32 cylinders, thanks to their compactness, are suitable for installation in confined spaces.
Being in compliance with the ISO 21287 Standard, the cylinders Series 32 can be used in conjunction with mountings/accessories suitable with ISO 15552 standard.
Series
Accessories
  • 1(current)
  • 2
  • 3
148 Products found
Compact cylinder ser. 32 - 32R2A050A100
Series 32
Compact cylinder ser. 32 - 32R2A050A080
Series 32
Series 32
Series 32
Series 32
Series 32
Series 32
Series 32
Compact cylinder ser. 32 - 32R2A032A050
Series 32
Compact cylinder ser. 32 - 32R2A032A040
Series 32
Compact cylinder ser. 32 - 32R2A025A050
Series 32
Compact cylinders - 32R2A025A025
Series 32
  • 1(current)
  • 2
  • 3

Construction Compact profile
Operation Single and double acting, magnetic
Design ISO 21287
Materials Anodized AL body and end-blocks - rolled stainless steel AISI 303 rod
Anodized AL piston - rod seal, end-block OR and piston seal in PU
High temperatures: rod seal, OR end-block and piston in FKM (140°)
Mounting With threaded holes on the end blocks
Flange - feet - trunnion
Stroke min and max (*) Ø12-16 = 5-200 mm
Ø20-25 = 5-300 mm
Ø32-40-50-63 = 5-400 mm
Ø80-100-125 = 5-500 mm
Operating temperature 0°C ÷ 80°C (with dry air -20°C)
Operating pressure 1 ÷ 10 bar (double-acting)
2 ÷ 10 bar (single-acting)
Fluid Clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Operation speed 10 ÷ 700mm/sec. (without load)

(*) the minimum stroke for the use of the sensors is 10 mm.

Full screen
Your configuration
Coding example
32 M 2 A 032 A 050
32 SERIES
M VERSION
M = male rod thread, mounted with rod nut Mod. U
F = female rod thread
R = antirotation with flange (from Ø20 to Ø100; no single-acting)
2 OPERATION
1 = single-acting, front spring
2 = double-acting
3 = double-acting, through-rod
4 = single-acting, rear spring
PNEUMATIC SYMBOLS
CS06
CD08
CD12
CS08
A MATERIALS
A = anodized aluminium body, end blocks and piston,
PU seals (rod, end-blocks OR and piston)
032 BORES
012 = 12 mm
016 = 16 mm
020 = 20 mm
025 = 25 mm
032 = 32 mm
040 = 40 mm
050 = 50 mm
063 = 63 mm
080 = 80 mm
100 = 100 mm
125 = 125 mm
A CONSTRUCTION
A = standard
050 STROKE (see the table)
VARIANTS
= standard
V = FKM rod seal
W = high temperatures (up to 140°C) non-magnetic (only for version M and F)
(_ _ _) = stem longer than _ _ _ mm
We think you are in United States.
Update your location?