text.skipToContent text.skipToNavigation
|
(0)
  1. Home
  2. Modules electrical
  3. Multi-serial Modules

Modules electrical

The supply includes:
2x tie-rods
Series
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Dimensions

Multi-serial modules

On this Module there are three connectors, one for supply on which it is possible to separate logic supply from power supply and two connectors for the inlet and outlet of the protocol. A Micro-USB port enables to interface with a PC and by means of the UVIX configuration software it is possible to monitor and configure both the Multi-serial Module and the I/O Modules. Connectable on the left side. These can be configured as PNP or NPN for the digital inputs, while for the analog inputs, both voltage and current is possible. The configuration of the Multi-serial Module and the components connected to it is also possible through different communication protocols. In the event of malfunction or breakage, even without power supply, a NFC function enables to download the configuration data, by means of a special App, on an external device to transmit them to a new Multi-serial Module.
NO WLAN / WITH WLAN Mod. Fieldbus Protocol 1 2 Bus-IN connector Bus-OUT connector
CX4010-0/CX401W-0 01 PROFIBUS Bus-OUT Bus-IN M12 B 5-pin male M12 B 5-pin female
CX4030-0/CX403W-0 03 CANopen Bus-OUT Bus-IN M12 A 4-pin male M12 A 4-pin female
CX4040-0/CX404W-0 04 EtherNet/IP Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4050-0/CX405W-0 05 EtherCAT Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4060-0/CX406W-0 06 PROFINET Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4070-0/CX407W-0 07 IO-link Bus - M12 B 5-pin male -


Multi-serial Module - Series CX4

Multi-serial Modules

On this module there are three connectors, one for supply on which it is possible to separate logic supply from power supply and two connectors for the inlet and outlet of the protocol. A Micro-USB port enables to interface with a PC and by means of the UVIX configuration software it is possible to monitor and configure both the Multi-serial Module and the I/O Modules. Connectable on the left side. These can be configured as PNP or NPN for the Digital Inputs, while for the Analog Inputs, both voltage and current is possible. The configuration of the Multi-serial Module and the components connected to it is also possible through different communication protocols. In the event of malfunction or breakage, even without power supply, a NFC function enables to download the configuration data, by means of a special App, on an external device to transmit them to a new Multi-serial Module.
NO WLAN / WITH WLAN Mod. Fieldbus Protocol 1 2 Bus-IN connector Bus-OUT connector
CX4010-0/CX401W-0 01 PROFIBUS Bus-OUT Bus-IN M12 B 5-pin male M12 B 5-pin female
CX4030-0/CX403W-0 03 CANopen Bus-OUT Bus-IN M12 A 4-pin male M12 A 4-pin female
CX4040-0/CX404W-0 04 EtherNet/IP Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4050-0/CX405W-0 05 EtherCAT Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4060-0/CX406W-0 06 PROFINET Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female


Valve islands, Size 1, Multipole and Fieldbus - Series D1

Multi-serial Modules

On this Module there are three connectors, one for supply on which it is possible to separate logic supply from power supply and two connectors for the inlet and outlet of the protocol. A Micro-USB port enables to interface with a PC and by means of the UVIX configuration software it is possible to monitor and configure both the Multi-serial Module and the I/O Modules. Connectable on the left side. These can be configured as PNP or NPN for the digital inputs, while for the analog inputs, both voltage and current is possible.
The configuration of the Multi-serial Module and the components connected to it is also possible through different communication protocols. In the event of malfunction or breakage, even without power supply, a NFC function enables to download the configuration data, by means of a special App, on an external device to transmit them to a new Multi-serial Module.
NO WLAN / WITH WLAN Mod. Fieldbus Protocol 1 2 Bus-IN connector Bus-OUT connector
CX4010-0/CX401W-0 01 PROFIBUS Bus-OUT Bus-IN M12 B 5-pin male M12 B 5-pin female
CX4030-0/CX403W-0 03 CANopen Bus-OUT Bus-IN M12 A 4-pin male M12 A 4-pin female
CX4040-0/CX404W-0 04 EtherNet/IP Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4050-0/CX405W-0 05 EtherCAT Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4060-0/CX406W-0 06 PROFINET Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4070-0/CX407W-0 07 IO-link Bus - M12 B 5-pin male -


Valve islands, Size 2, Multipole and Fieldbus - Series D2

Multi-serial Modules

On this Module there are three connectors, one for supply on which it is possible to separate logic supply from power supply and two connectors for the inlet and outlet of the protocol. A Micro-USB port enables to interface with a PC and by means of the UVIX configuration software it is possible to monitor and configure both the Multi-serial Module and the I/O Modules. Connectable on the left side. These can be configured as PNP or NPN for the digital inputs, while for the analog inputs, both voltage and current is possible.
The configuration of the Multi-serial Module and the components connected to it is also possible through different communication protocols. In the event of malfunction or breakage, even without power supply, a NFC function enables to download the configuration data, by means of a special App, on an external device to transmit them to a new Multi-serial Module.
NO WLAN / WITH WLAN Mod. Fieldbus Protocol 1 2 Bus-IN connector Bus-OUT connector
CX4010-0/CX401W-0 01 PROFIBUS Bus-OUT Bus-IN M12 B 5-pin male M12 B 5-pin female
CX4030-0/CX403W-0 03 CANopen Bus-OUT Bus-IN M12 A 4-pin male M12 A 4-pin female
CX4040-0/CX404W-0 04 EtherNet/IP Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4050-0/CX405W-0 05 EtherCAT Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4060-0/CX406W-0 06 PROFINET Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4070-0/CX407W-0 07 IO-link Bus - M12 B 5-pin male -


Valve islands, Size 4, Multipole and Fieldbus - Series D4

Multi-serial modules

On this Module there are three connectors, one for supply on which it is possible to separate logic supply from power supply and two connectors for the inlet and outlet of the protocol. A Micro-USB port enables to interface with a PC and by means of the UVIX configuration software it is possible to monitor and configure both the Multi-serial Module and the I/O Modules. Connectable on the left side. These can be configured as PNP or NPN for the digital inputs, while for the analog inputs, both voltage and current is possible.
The configuration of the Multi-serial Module and the components connected to it is also possible through different communication protocols. In the event of malfunction or breakage, even without power supply, a NFC function enables to download the configuration data, by means of a special App, on an external device to transmit them to a new Multi-serial Module.
NO WLAN / WITH WLAN Mod. Fieldbus Protocol 1 2 Bus-IN connector Bus-OUT connector
CX4010-0/CX401W-0 01 PROFIBUS Bus-OUT Bus-IN M12 B 5-pin male M12 B 5-pin female
CX4030-0/CX403W-0 03 CANopen Bus-OUT Bus-IN M12 A 4-pin male M12 A 4-pin female
CX4040-0/CX404W-0 04 EtherNet/IP Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4050-0/CX405W-0 05 EtherCAT Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4060-0/CX406W-0 06 PROFINET Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4070-0/CX407W-0 07 IO-link Bus - M12 B 5-pin male -


Valve islands, Size 5, Multipole and Fieldbus - Series D5

Multi-serial modules

On this Module there are three connectors, one for supply on which it is possible to separate logic supply from power supply and two connectors for the inlet and outlet of the protocol. A Micro-USB port enables to interface with a PC and by means of the UVIX configuration software it is possible to monitor and configure both the Multi-serial Module and the I/O Modules. Connectable on the left side. These can be configured as PNP or NPN for the digital inputs, while for the analog inputs, both voltage and current is possible.
The configuration of the Multi-serial Module and the components connected to it is also possible through different communication protocols. In the event of malfunction or breakage, even without power supply, a NFC function enables to download the configuration data, by means of a special App, on an external device to transmit them to a new Multi-serial Module.
NO WLAN / WITH WLAN Mod. Fieldbus Protocol 1 2 Bus-IN connector Bus-OUT connector
CX4010-0/CX401W-0 01 PROFIBUS Bus-OUT Bus-IN M12 B 5-pin male M12 B 5-pin female
CX4030-0/CX403W-0 03 CANopen Bus-OUT Bus-IN M12 A 4-pin male M12 A 4-pin female
CX4040-0/CX404W-0 04 EtherNet/IP Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4050-0/CX405W-0 05 EtherCAT Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4060-0/CX406W-0 06 PROFINET Bus-IN Bus-OUT M12 D 4-pin female M12 D 4-pin female
CX4070-0/CX407W-0 07 IO-link Bus - M12 B 5-pin male -


We think you are in United States.
Update your location?