text.skipToContent text.skipToNavigation
Series 90

Series 90

Single- and double-acting, cushioned, magnetic
ø 32, 40, 50, 63, 80, 100 and 125 mm
The Series 90 cylinders can be used in critical applications in which a high corrosion resistance is required (for example off-shore, marine, food).

This series of cylinders is normally equipped with end of stroke buffers with adjustable pneumatic cushioning.
Moreover, they are equipped with a mechanical cushioning that makes the impact of the piston less noisy as it reaches the end of the stroke.
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Construction with tie-rods
Operation single-acting or double-acting
Design ISO 15552
Materials - end blocks, barrel and rod in stainless steel AISI 316
- seals in NBR
- plastic guiding element, NSF H1-certified lubricant
Mountings several types of cylinders mounting brackets available
Strokes min. max
Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Operating pressure 1 ÷ 10 bar
Speed 10 ÷ 1000 mm/sec (no load)
Fluid Filtered air, without lubrication.
If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Full screen
Your configuration