text.skipToContent text.skipToNavigation
Series 45

Series 45

Suitable for cylinders:
- DIN/ISO 6432 (ø 12, 16, 20, 25 mm)
- ISO 15552, previous DIN/ISO 6431 (ø 32, 40, 50, 63, 80, 100 mm)
Series 45 guide units can be used with all DIN/ISO 6432 cylinders of ø 12 ÷ ø 25 and ISO 15552, previous DIN/ISO 6431, cylinders of ø 32 ÷ ø 100.

They have been developed in order to prevent piston rod rotation and can support possible radial loads.

Series 45 guide units are available in three different models depending on the applicable loads. The UT and HT guides with crawling supports are self lubricating, while HB guides have a ball bush.
To ensure the right choice of the loads in relation to the stroke, please refer to the graphs. The shorter the stroke the higher will be the applicable loads.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Type of construction U and H
Operation Mod. 45NUT and 45NHT: without lubrication
Mod. 45NHB requires lubrication according to DIN 51825 code KP2G-20
Material Body: anodized aluminium
flexible coupling: stainless steel AISI 303
plate: anodized aluminium
guided columns: rolled stainless steel AISI 420B (mod. 45NUT and 45NHT) - hardened steel C50 (Mod. 45NHB)
Assembly By means of threaded holes
Strokes min - max See diagrams
Installation In any position
Full screen
Your configuration
Coding example
45 N UT 050 A 0100
45 SERIES
N VERSION
N = standard
UT OPERATION
UT = "U" self lubricating guide
HT = "H" self lubricating guide
HB = "H" ball guide
050 BORE
016 = Ø12-16 mm (available only in the UT version with "U" self lubricating guide)
020 = 20 mm
025 = 25 mm
032 = 32 mm
040 = 40 mm
050 = 50 mm
063 = 63 mm
080 = 80 mm
100 = 100 mm
A MATERIALS
A = anodized aluminium body - stainless steel AISI 420B columns for 45UT and 45HT - hardened steel C50 columns for 45HB
0100 STROKE in mm
We think you are in United States.
Update your location?