text.skipToContent text.skipToNavigation
Series 41K

Series 41K

Double-acting, cushioned, magnetic
ø 160 - 200 mm
Series 41K cylinder comply with the ISO 15552 standard and can be assembled with the entire range of standard accessories.

The mounting brackets used on the end-blocks tube are designed in an extremely secure way, making use of cylinder tie-rods positioned internally and not visible on the assembled cylinder.
This cylinder series is normally equipped with adjustable endstroke cushioning by means of a screw positioned on the end-block.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Type of construction Profile (with tie-rods)
Operation Double-acting
Design ISO 15552
Materials AL end blocks and piston - rolled AISI 420B stainless steel piston rod - zinc-plated steel piston rod nut - anodized AL-profile tube
zinc-plated steel tie-rods and tie-rod nuts - NBR-PU rod - piston - cushion seals - brass rod scraper
Mounting With front flange - rear flange - foot mounts - centre trunnion - front and rear trunnion
Strokes min - max 10 ÷ 2500 mm
Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Operating pressure 1 ÷ 10 bar
Speed 10 ÷ 500 mm/sec (without load)
ATEX version
Ø 160 - 200 10 ÷ 500 mm/sec
Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Full screen
Your configuration
Coding example
41 K 2 P 160 A 0200
41 SERIES
K VERSION
K = standard magnetic
2 OPERATION
2 = double-acting, front and rear cushions
3 = double-acting, no cushion
4 = double-acting, rear cushions
5 = double-acting, front cushion
6 = double-acting, through-rod, front and rear cushions
8 = double-acting, through-rod, no cushion
PNEUMATIC SYMBOLS
CD09
CD07
CD37
CD38
CD13
CD14
P MATERIALS
P = see the GENERAL DATA table on the previous page
R = AISI 420B stainless steel tie-rods, AISI 303 stainless steel tie-rod nuts
C = rolled AISI 303 stainless steel piston rod, AISI 304 stainless steel piston rod nut
U = rolled stainless steel AISI 303 piston rod, AISI 304 stainless steel piston rod nut,
stainless steel AISI 420B tie-rods, stainless steel AISI 303 tie-rod nuts, AISI 420B stainless steel tie-rods, AISI 303 stainless steel tie-rod nuts
W = rolled AISI 304 stainless steel piston rod, AISI 304 stainless steel piston rod nut, AISI 420B stainless steel tie-rods, AISI 303 stainless steel
tie-rod nuts
160 BORE
160 = 160 mm
200 = 200 mm
A TYPE OF DESIGN
A = standard
F = cylinder with centre trunnion
0200 STROKE (see the table)
= standard
V = FKM rod seal
W = all seals in FKM +130°C
C = PU coated cylinder. Colour: Grey
G = with brass rod scraper (chrome plated AISI 420B stainless steel rod, NBR rod seal)
( _ _ _ ) = extended piston rod _ _ _ mm


*Version C is available on request. For further information, please contact our technical dept.
CERTIFICATIONS
EX = ATEX
We think you are in United States.
Update your location?