Latvia
Direct acting solenoid valves
Series W
3/2-way - Normally Closed (NC) and Normally Open (NO)
Series W directly operated solenoid valves are available as 3/2-way either NC or NO. Both versions can be mounted on single sub-bases or manifolds and they are equipped with a monostable manual override.
Download catalogue
Series
Accessories
Solenoid valves 2 faston - W000-301-W23
Solenoide valves - W000-303-E12-OX2
24dc 2w nc 1.5 elett. fkm - W000-303-F23
Solenoid valves - W000-303-W12
Dir.op.mini sol.vlv ser. w - W000-303-W13
24dc 2w nc 1.5 sol.v. - W000-303-W13P
Dir.op.mini sol.vlv ser. w - W000-303-W22
Dir.op.mini sol.vlv ser. w - W000-303-W23
Dir.op.mini sol.vlv ser. w - W000-303-W24
Solenoid valves - W000-305-W12
Solenoid valves - W000-305-W13
Solenoid valves 2 faston - W000-305-W23
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| TECHNICAL FEATURES | |
| Function | 3/2 NC - 3/2 NO |
| Operation | direct acting poppet type |
| Pneumatic connections | on subbase with ISO 15218 interface |
| Orifice diameter | 0,8 … 1,5 mm |
| Flow coefficient kv (l/min) | 0,21 … 0,54 |
| Operating pressure | 0 ÷ 5 … 10 bar |
| Operating temperature | 0 ÷ 50 °C |
| Fluid | filtered air class [5:4:4] according to ISO 8573-1:2010 (max oil viscosity 32 cSt), inert gas |
| Response time (ISO 12238) | ON <10 ms - OFF <15 ms |
| Manual override | monostable |
| Installation | in any position |
| MATERIALS IN CONTACT WITH THE MEDIUM | |
| Body | PBT |
| Seals | PU - NBR - FKM - EPDM |
| Internal parts | stainless steel |
| ELECTRICAL FEATURES | |
| Voltage | 12 ... 48 V DC - other voltages on demand |
| Voltage tolerance | ±10% |
| Power consumption | 2 W - 1 W (24 V DC only) |
| Duty cycle | ED 100% |
| Electrical connection | connector DIN EN 175 301-803-C (8 mm) - 300 mm flying leads |
| Protection class | IP65 with connector |
| Special versions available on demand |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
CODING EXAMPLE
| W | 0 | 00 | 3 | 0 | 3 | W | 2 | 3 |
| W | SERIES |
| 0 |
BODY DESIGN 0 = single sub-base (only M5) or interface 1 = single manifold 2 = double manifold |
| 00 |
NUMBER OF POSITIONS 00 = ISO 15218 interface 01 = single base (M5 only) 02 ÷ 99 = manifold number of positions |
| 3 |
NUMBER OF WAYS - FUNCTIONS 0 = manifold or single sub-base 3 = 3/2-way - NC 4 = 3/2-way - NO 5 = 3/2-way - NC electric part revolved by 180° 6 = 3/2-way - NO electric part revolved by 180° |
| 0 |
VALVE PORTS 0 = ISO 15218 interface MANIFOLD PORTS for P - PL - PN - W Series 2 = M5 thread - front outlets 3 = tube Ø 3 mm fittings - front outlets 4 = tube Ø 4 mm fittings - front outlets 6 = M5 thread - bottom outlets 7 = tube Ø 3 mm fittings - bottom outlets 8 = tube Ø 4 mm fittings - bottom outlets |
| 3 |
ORIFICE DIAMETER 1 = Ø 0.8 mm 3 = Ø 1.5 mm 5 = Ø 1.1 mm - NC versions 6 = Ø 1.5 mm - NC versions with voltage tolerance -25% ÷ +10% 5 = Ø 0.9 mm - NO versions |
| W |
MATERIALS E = PBT body - EPDM seals F = PBT body - FKM seals W = PBT body - NBR - FKM - PU seals |
| 2 |
ELECTRICAL CONNECTION 1 = 300 mm flying leads 2 = DIN EN 175 301-803-C (8 mm) |
| 3 |
VOLTAGE - POWER CONSUMPTION 2 = 12 V DC - 2 W 3 = 24 V DC - 1 W - NC Ø 0.8 mm version only 3 = 24 V DC - 2 W 4 = 48 V DC - 2 W |
|
FIXING = fixing screws for metal P = fixing screws for plastic |
|
|
OPTIONS: = standard OX1 = for use with oxygen (non volatile residual less than 550 mg/m²) OX2 = for use with oxygen (non volatile residual less than 33 mg/m²) |
1-7/7 results
