Turkey
Lubricators
Series MD
Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
The lubricator allows the nebulization of lubricating oil which is necessary to the functioning of components in specific conditions of use.
By means of a regulation screw the amount of oil can be properly adjusted in order to avoid unnecessary overdoses.
By means of a regulation screw the amount of oil can be properly adjusted in order to avoid unnecessary overdoses.
Download catalogueSeries
Accessories
Lubricator ser. md - MD1-L00
|
Ports
Without cartridges
|
Lubricator - MD1-L00-1/4
|
|
Ports
G1/4
|
Conn. kit 1/4 ser. md (pair) - MD1-A-1/4
Conn. kit 1/8 ser. md (pair) - MD1-A-1/8
Conn. kit 3/8 ser. md (pair) - MD1-A-3/8
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Construction | modular, compact |
| Materials | see TABLE OF MATERIALS on the following page |
| Ports | with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm |
| Oil capacity | 40 cm³ |
| Oil refilling | even during use |
| Mounting | in vertical position by means of through holes in the body |
| Operating temperature | -5°C ÷ 50°C up to 16 bar |
| Oil for lubrication | use ISO VG32 oils. Once applied, the lubrication should never be interrupted. |
| Operating pressure | 0 ÷ 16 bar |
| Min. air consumption for lubrication at 1 bar | 15 Nl/min |
| Min. air consumption for lubrication at 6 bar | 25 Nl/min |
| Nominal flow | see FLOW DIAGRAMS on the following pages |
| Fluid | compressed air |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
CODING EXAMPLE
| MD | 1 | - | L | 00 | 1/8 | - |
| MD | SERIES |
| 1 |
DIMENSION: 1 = 42 mm |
| L | LUBRICATOR |
| 00 |
DESIGN TYPE: 00 = oil mist with refill valve 10 = oil mist without refill valve |
| 1/8 |
PORTS (IN - OUT)*: = without ports 1/8 = G1/8 1/4 = G1/4 3/8 = G3/8 6 = tube Ø6 8 = tube Ø8 10 = tube Ø10 * NOTE: if the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated. Example: MD1-L00-1/4-1/8 |
Series MD lubricators - dimensions
LU0 = Lubricator
| Mod. | A | B | C | E | H | I | L | M | N | O | P | R | S | T | V | Weight (kg) |
| MD1-L00 | - | G1/8 | 42 | 42 | 48,7 | 43 | Ø4 | 75 | 162,2 | 88 | 45,2 | 74,2 | 113,5 | 34,6 | 9 | 0,2 |
| MD1-L00-1/8 | G1/8 | G1/8 | 42 | 42 | 48,7 | 43 | Ø4 | 75 | 162,2 | 88 | 45,2 | 74,2 | 113,5 | 34,6 | 9 | 0,2 |
| MD1-L00-1/4 | G1/4 | G1/8 | 42 | 42 | 48,7 | 43 | Ø4 | 75 | 162,2 | 88 | 45,2 | 74,2 | 113,5 | 34,6 | 9 | 0,2 |
| MD1-L00-3/8 | G3/8 | G1/8 | 42 | 42 | 48,7 | 43 | Ø4 | 75 | 162,2 | 88 | 45,2 | 74,2 | 113,5 | 34,6 | 9 | 0,2 |
| MD1-L00-6 | Ø6 | G1/8 | 47 | 42 | 48,7 | 43 | Ø4 | 75 | 162,2 | 88 | 45,2 | 74,2 | 113,5 | 34,6 | 9 | 0,2 |
| MD1-L00-8 | Ø8 | G1/8 | 62 | 42 | 48,7 | 43 | Ø4 | 75 | 162,2 | 88 | 45,2 | 74,2 | 113,5 | 34,6 | 9 | 0,2 |
| MD1-L00-10 | Ø10 | G1/8 | 67 | 42 | 48,7 | 43 | Ø4 | 75 | 162,2 | 88 | 45,2 | 74,2 | 113,5 | 34,6 | 9 | 0,2 |
