Estonia
Pressure microregulators
Series T
Ports G1/8 and G1/4
Series T pressure regulators are
available with G1/8 and G1/4 brass connections.
A self-relieving piston has been incorporated into
the design to allow decreasing adjustments.
Non-relieving versions are also available.
All models are equipped with a by-pass valve which is useful when a regulator should be inserted between the valve and cylinder (or capacity) without any negative influence on the exhaust.
available with G1/8 and G1/4 brass connections.
A self-relieving piston has been incorporated into
the design to allow decreasing adjustments.
Non-relieving versions are also available.
All models are equipped with a by-pass valve which is useful when a regulator should be inserted between the valve and cylinder (or capacity) without any negative influence on the exhaust.
Download catalogueSeries
Accessories
Pressure microregulator ser. t - T104-R00
|
Min operating pressure [Bar]
0.5 ÷ 10 bar
|
Ports
G1/4
|
Pressure microregulator ser. t - T108-R00
|
|
Min operating pressure [Bar]
0.5 ÷ 10 bar
|
Ports
G1/8
|
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Construction | piston |
| Materials | technopolymer body and piston, stainless steel spring, brass inserts, NBR O-ring and poppet |
| Ports | G1/8 - G1/4 |
| Weight | g 95 |
| Pressure gauge ports | G1/8 |
| Mounting | in-line or panel mounting (in any position) |
| Operating temperature | -5°C ÷ 50°C (with the dew point of the fluid lower than 2°C at the min. working temperature) |
| Inlet pressure | 0 ÷ 12 bar |
| Outlet pressure | 0.5 ÷ 10 bar (standard) 0.5 ÷ 2 bar 0.5 ÷ 4 bar 0.5 ÷ 7 bar |
| Nominal flow | see FLOW DIAGRAMS on the following pages |
| Secondary pressure (relieving) | with relieving (standard) without relieving (all regulators are provided with high relief flow VS function) |
| Fluid | compressed air |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
CODING EXAMPLE
| T | 1 | 08 | R | 0 | 0 | 2 |
| T | SERIES | ||
| 1 | SIZE | ||
| 08 |
PORTS: 08 = G1/8 |
04 = G1/4 |
|
| R | REGULATOR | ||
| 0 |
OPERATING PRESSURE: 0 = 0,5 ÷ 10 1 = 0 ÷ 4 |
2 = 0 ÷ 2 7 = 0 ÷ 7 (standard) |
|
| 0 |
DESIGN TYPE: 0 = self-relieving ; 1 = non relieving |
||
| 2 |
MANOMÈTRES: ** = sans manomètre (standard) 1 = avec manomètre 0-2,5, avec pression de travail 0÷2 bar 2 = with pressure gauge 0-6, with working pressure 0÷4 bar |
3 = with pressure gauge 0-10, with working pressure 0,5÷7 bar 4 = with pressure gauge 0-12, with working pressure 0,5÷10 bar |
** les manomètres sont fournis démontage manomètres mod. M043-P .. |
Series T pressure microregulator
PR03 = regulator with relieving
and by-pass valve
PR04 = regulator without relieving
and with by-pass valve
| Mod. | A | B | C | F | G | I | L | M | N | R | S | U |
| T108-R00 | 77 | 35 | 42 | 9,5 | 25,5 | 28 | M30x1,5 | 46 | 41 | 3 | 7 | G1/8 |
| T104-R00 | 77 | 35 | 42 | 9,5 | 25,5 | 28 | M30x1,5 | 46 | 41 | 3 | 7 | G1/4 |
