马来西亚
Analog Output Module Mod. ME4-T000-AL and ME4-T000-AT
Modules electrical
2x tie-rods
Analog Output Module Mod. ME4-T000-AL and ME4-T000-AT
The Analog Output Module can be connected at the left of the Multi serial module and can be placed in any order with other input/output devices.
It is possible to configure every analog output as 0-10V, 0-5V, 4-20mA, 0-20mA output with a resolution up to 16 bit.
External voltage of 24 V is available to supply the device connected (max 0,25A/channel). The output is protected against short-circuit.
The module is equipped with diagnostics (Status) and is available both in the version with two M12 connectors with 5 contacts, and in terminal block version with Push-in spring connection.
| 型号 | 产品代号 | Number of analog outputs | 插座 | 插座数 | 尺寸 | 信号指示 | Sensor supply | Overvoltage protection | 模块消耗电流 | 防护等级 | 工作温度 | 质量 |
| ME4-T000-AL | T | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | M12 A 5 pin female | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP65 | 0 ÷ 50°C | 110 g |
| ME4-T000-AT | U | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | Terminal block 5-pin (Push-In) | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP20 | 0 ÷ 50°C | 110 g |
Analog Output Module Mod. ME4-T000-AL and ME4-T000-AT
The Analog Output Module can be connected at the left of the Multi serial module and can be placed in any order with other input/output devices.
It is possible to configure every analog output as 0-10V, 0-5V, 4-20mA, 0-20mA output with a resolution up to 16 bit.
External voltage of 24 V is available to supply the device connected (max 0,25A/channel). The output is protected against short-circuit.
The module is equipped with diagnostics (Status) and is available both in the version with two M12 connectors with 5 contacts, and in terminal block version with Push-in spring connection.
| 型号 | 产品代号 | Number of analog outputs | 插座 | 插座数 | 尺寸 | 信号指示 | Sensor supply | Overvoltage protection | 模块消耗电流 | 防护等级 | 工作温度 | 质量 |
| ME4-T000-AL | T | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | M12 A 5 pin female | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP65 | 0 ÷ 50°C | 110 g |
| ME4-T000-AT | U | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | Terminal block 5-pin (Push-In) | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP20 | 0 ÷ 50°C | 110 g |
Analog Output Module Mod. ME4-T000-AL and ME4-T000-AT
The Analog Output Module can be connected at the left of the Multi serial module and can be placed in any order with other input/output devices.
It is possible to configure every analog output as 0-10V, 0-5V, 4-20mA, 0-20mA output with a resolution up to 16 bit.
External voltage of 24 V is available to supply the device connected (max 0,25A/channel). The output is protected against short-circuit.
The module is equipped with diagnostics (Status) and is available both in the version with two M12 connectors with 5 contacts, and in terminal block version with Push-in spring connection.
| 型号 | 产品代号 | Number of analog outputs | 插座 | 插座数 | 尺寸 | 信号指示 | Sensor supply | Overvoltage protection | 模块消耗电流 | 防护等级 | 工作温度 | 质量 |
| ME4-T000-AL | T | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | M12 A 5 pin female | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP65 | 0 ÷ 50°C | 110 g |
| ME4-T000-AT | U | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | Terminal block 5-pin (Push-In) | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP20 | 0 ÷ 50°C | 110 g |
Analog Output Module Mod. ME4-T000-AL and ME4-T000-AT
The Analog Output Module can be connected at the left of the Multi serial module and can be placed in any order with other input/output devices.
It is possible to configure every analog output as 0-10V, 0-5V, 4-20mA, 0-20mA output with a resolution up to 16 bit.
External voltage of 24 V is available to supply the device connected (max 0,25A/channel). The output is protected against short-circuit.
The module is equipped with diagnostics (Status) and is available both in the version with two M12 connectors with 5 contacts, and in terminal block version with Push-in spring connection.
| 型号 | 产品代号 | Number of analog outputs | 插座 | 插座数 | 尺寸 | 信号指示 | Sensor supply | Overvoltage protection | 模块消耗电流 | 防护等级 | 工作温度 | 质量 |
| ME4-T000-AL | T | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | M12 A 5 pin female | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP65 | 0 ÷ 50°C | 110 g |
| ME4-T000-AT | U | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | Terminal block 5-pin (Push-In) | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP20 | 0 ÷ 50°C | 110 g |
Analog Output Module Mod. ME4-T000-AL and ME4-T000-AT
The Analog Output Module can be connected at the left of the Multi serial module and can be placed in any order with other input/output devices.
It is possible to configure every analog output as 0-10V, 0-5V, 4-20mA, 0-20mA output with a resolution up to 16 bit.
External voltage of 24 V is available to supply the device connected (max 0,25A/channel). The output is protected against short-circuit.
The module is equipped with diagnostics (Status) and is available both in the version with two M12 connectors with 5 contacts, and in terminal block version with Push-in spring connection.
| 型号 | 产品代号 | Number of analog outputs | 插座 | 插座数 | 尺寸 | 信号指示 | Sensor supply | Overvoltage protection | 模块消耗电流 | 防护等级 | 工作温度 | 质量 |
| ME4-T000-AL | T | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | M12 A 5 pin female | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP65 | 0 ÷ 50°C | 110 g |
| ME4-T000-AT | U | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | Terminal block 5-pin (Push-In) | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP20 | 0 ÷ 50°C | 110 g |
Analog Output Module Mod. ME4-T000-AL and ME4-T000-AT
The Analog Output Module can be connected at the left of the Multi serial module and can be placed in any order with other input/output devices.
It is possible to configure every analog output as 0-10V, 0-5V, 4-20mA, 0-20mA output with a resolution up to 16 bit.
External voltage of 24 V is available to supply the device connected (max 0,25A/channel). The output is protected against short-circuit.
The module is equipped with diagnostics (Status) and is available both in the version with two M12 connectors with 5 contacts, and in terminal block version with Push-in spring connection.
| 型号 | 产品代号 | Number of analog outputs | 插座 | 插座数 | 尺寸 | 信号指示 | Sensor supply | Overvoltage protection | 模块消耗电流 | 防护等级 | 工作温度 | 质量 |
| ME4-T000-AL | T | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | M12 A 5 pin female | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP65 | 0 ÷ 50°C | 110 g |
| ME4-T000-AT | U | 2 (Config. 0-10V,0- 5V,0-20mA,4-20mA) | Terminal block 5-pin (Push-In) | 2 | 122x35,6 mm | 2 yellow led 1 red led | 24 V DC | 500 mA shared between the two channels | max 6 mA | IP20 | 0 ÷ 50°C | 110 g |