Módulos Multiserie
Serie CX4
Interface with: PROFIBUS, CANopen, EtherNet/IP, PROFINET, EtherCAT.
Can be integrated with I/O Modules.
Can be integrated with I/O Modules.
Series CX4 multi-serial module can interface with the most common fieldbus protocols, like Profibus-DP, CANOpen, EtherCAT, EtherNet/IP, PROFINET. The possibility to enlarge with both Digital and Analog I/O modules, the acquisition of signals coming from Bridge, RTD or TC sensors, the resolution of up to 24 bit and the high number of manageable signals make it particularly suitable for different needs.
Connectable with PC through MicroUSB port, check and configuration of connected components by means of UVIX software. Configuration through Fieldbus. By means of a mechanical interface connection it is used in combination with the Series D valve islands.
Connectable with PC through MicroUSB port, check and configuration of connected components by means of UVIX software. Configuration through Fieldbus. By means of a mechanical interface connection it is used in combination with the Series D valve islands.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
there are no salable codes online
Look in the "Accessory" tab for the Configurator
addtocart.popup.message.success
La cantidad solicitada está parcialmente confirmada
El producto {0} ya está en su cesta con la cantidad {1}. Puede actualizar la cantidad desde la página de la cesta.
El producto no está activo
No se ha podido añadir el producto a la cesta porque no hay stock suficiente
La cantidad debe ser superior a cero
La cantidad mínima permitida para el producto {0} es {1}
La cantidad máxima permitida para el producto {0} es {1}
El tamaño del envase para el producto {0} es {1}
No es posible añadir el producto con código {0} a esta cesta
Se ha producido un error, inténtelo de nuevo más tarde o contacte con el servicio de atención al cliente.
Número de salidas digitales | 128 |
Número de salidas analógicas | 16 |
Número de entradas digitales | 128 |
Número de entradas analógicas | 16 |
Máxima absorción de entrada | 1,5 A |
Máxima absorción de salida | 2,5 A |
Tensión de alimentación | 24 V DC +/-10% alimentación lógica 24 V DC +/-10% alimentación eléctrica |
Protección | sobrecarga y polaridad inversa |
Clase de protección | IP65 (IP20 en caso de módulo I/O con bloque de terminales) |
Según la norma | EN-61131-2 |
Temperatura de funcionamiento | 0-50°C |
Material | polímero |
addtocart.popup.message.success
La cantidad solicitada está parcialmente confirmada
El producto {0} ya está en su cesta con la cantidad {1}. Puede actualizar la cantidad desde la página de la cesta.
El producto no está activo
No se ha podido añadir el producto a la cesta porque no hay stock suficiente
La cantidad debe ser superior a cero
La cantidad mínima permitida para el producto {0} es {1}
La cantidad máxima permitida para el producto {0} es {1}
El tamaño del envase para el producto {0} es {1}
No es posible añadir el producto con código {0} a esta cesta
Se ha producido un error, inténtelo de nuevo más tarde o contacte con el servicio de atención al cliente.
EJEMPLO DE CODIFICACIÓN
CX | 4 | 01 | W | - | 2A2Q | - | R |
CX | SERIES |
4 |
VERSION 4 = CX4 |
01 |
PROTOCOL 00 = Base closed without Fieldbus cover 01 = PROFIBUS 03 = CANopen 04 = EtherNet/IP 05 = EtherCAT 06 = PROFINET |
W |
INTERFACE 0 = No interface W = WLAN |
2A2Q |
INPUT/OUTPUT MODULES 0 = no module A = 8 digital inputs M8 B = 16 digital inputs terminal block (Push-in) connection C = 2 analog inputs (config. 0-10V, ±10V, 0-20mA, 4-20mA, ±20mA) M12 D = 2 analog inputs (config. 0-10V, ±10V, 0-20mA, 4-20mA, ±20mA) terminal block (Push-in) connection E = 2 BRIDGE inputs M12 F = 2 BRIDGE inputs terminal block (Push-in) connection G = 2 RTD inputs M12 (PT100, PT200, PT500, PT1000) H = 2 RTD inputs terminal block (Push-in) connection (PT100, PT200, PT500, PT1000) L = 2 TCM12 inputs (THERMOCOUPLES) M = 2 TC inputs terminal block (Push-in) connection (THERMOCOUPLES) Q = 8 digital outputs M8 R = 16 digital outputs terminal block (Push-in) connection T = 2 Analog outputs (config. 0-10V,±10V,0-20mA, 4-20mA,±20mA), M12 U = 2 Analog outputs (config. 0-10V,±10V,0-20mA,4-20mA,±20mA), terminal block W ** = Closed base without I / O cover |
R |
FIXING TYPE = direct R = DIN rail |
** = The closed base without I / O cover must always be placed after the other modules if present ex: CX401W-2A2W-R...
1-16/16 resultados
1-15/15 resultados