Brazil
Filter-regulators
Series MX
MX2 ports: G3/8, G1/2, G3/4 - MX3 ports: G3/4, G1
Modular
Bowl with technopolymer cover and bayonet-type mounting
Modular
Bowl with technopolymer cover and bayonet-type mounting
Series MX filter-regulators integrate filter and pressure reducer in one unit. They are, therefore, compact and suitable for pre-filtering functions.
Available with or without draining (relieving), they are equipped with a valve diaphragm for a direct pressure regulation and with an integrated condensate drainer, manual or automatic. Moreover, they are equipped with a built-in pressure gauge.
The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
A special configurator, available on Camozzi website at http://catalogue.camozzi.com (sec. Configurators), allows the customer to choose the most suitable solution for his application, selecting single components or by configuring assembled FRLs.
Available with or without draining (relieving), they are equipped with a valve diaphragm for a direct pressure regulation and with an integrated condensate drainer, manual or automatic. Moreover, they are equipped with a built-in pressure gauge.
The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
A special configurator, available on Camozzi website at http://catalogue.camozzi.com (sec. Configurators), allows the customer to choose the most suitable solution for his application, selecting single components or by configuring assembled FRLs.
Download catalogueSeries
Accessories
Filter-regulator ser. mx - MX2-1/2-FR0000
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX2-1/2-FR0004
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX2-1/2-FR0304
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX2-1/2-FR1004
|
|
Filter element
5 µm with relieving
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX2-3/4-FR0000
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator - MX2-3/4-FR0004
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX2-3/8-FR0000
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX2-3/8-FR0004
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX2-3/8-FR1004
|
|
Filter element
5 µm with relieving
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX3-1-FR0000
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator ser. mx - MX3-1-FR0004
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
Filter-regulator - MX3-1-FR0300
|
|
Filter element
25 µm with relieving (standard)
|
Min operating pressure [Bar]
0.5 ÷ 10 bar (standard)
|
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Construction | modular, compact with filtering element in HDPE |
| Materials | see TABLE OF MATERIALS on the following page |
| Ports | MX2: G3/8 - G1/2 - G3/4 - MX3: G3/4 - G1 |
| Condensate capacity | MX2: 55 cc - MX3: 85 cc |
| Mounting | vertical in-line, wall-mounting (by means of clamps), panel mounting |
| Operating temperature | 0,3 ÷ 16 bar / -5°C ÷ 50°C (with the dew point of the fluid lower than 2°C at the min. working temperature) 0,3 ÷ 10 bar / -5°C ÷ 60°C (with the dew point of the fluid lower than 2°C at the min. working temperature) |
| Quality of delivered air according to ISO 8573-1:2010 | Class 6.8.4 with 5 μm filtering element Class 7.8.4 with 25 μm filtering element |
| Draining of condensate | MX2: manual-semi automatic (standard), automatic, depressurization protected, direct G1/8 exhaust MX3: manual-semi automatic (standard), automatic, direct G1/8 exhaust |
| Exit pressure | 0,5 ÷ 10 bar (standard), 0,5 ÷ 4 bar and 0,5 ÷ 7 bar |
| Nominal flow | see FLOW DIAGRAMS on the following page |
| Fluid | compressed air |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
CODING EXAMPLE
| MX | 2 | - | 1/2 | - | FR | 0 | 0 | 0 | 4 | - | LH |
| MX | SERIES |
| 2 |
SIZE 2 = G3/8 - G1/2 - G3/4 3 = G3/4 - G1 |
| 1/2 |
PORT 3/8 = G3/8 1/2 = G1/2 3/4 = G3/4 1 = G1 |
| FR | FILTER-REGULATOR |
| 0 |
FILTERING ELEMENT WITH DESIGN TYPE: 0 = 25 µm with relieving (standard) 1 = 5 µm with relieving 2 = 25 µm without relieving (with semiautomatic-manual drain only) 3 = 5 µm without relieving (with semiautomatic-manual drain only) 4 = 25 µm with relieving and by-pass valve 5 = 5 µm with relieving and by-pass valve 6 = 25 µm without relieving, with by-pass valve 7 = 5 µm without relieving, with by-pass valve |
| 0 |
DRAINING OF CONDENSATE (further details in the dedicated section) 0 = semiautomatic-manual drain 3 = automatic drain 5 = depressuring drain, protected 8 = without drain, with port G1/8 |
| 0 |
OPERATING PRESSURE 0 = 0,5 ÷ 10 bar (standard) 4 = 0,5 ÷ 4 bar 7 = 0,5 ÷ 7 bar (MX2 only) |
| 4 |
PRESSURE GAUGE 0 = without pressure gauge (with threaded port) 2 = with built-in pressure gauge 0-6 and working pressure 0,5 ÷ 4 bar 3 = with built-in pressure gauge 0-10 and working pressure 0,5 ÷ 7 bar (MX2 only) 4 = with built-in pressure gauge 0-12 and working pressure 0,5 ÷ 10 bar (standard) |
| LH |
FLOW DIRECTION = from left to right (standard) LH = from right to left |
For the assembly of a single component with fixing flanges or wall-mounting, see the section “FRL Series MX Assembled”
Filter-regulators Series MX - dimensions
| Mod. | A | B | C | D | F | G | H | I | L | M | N | O | P | Q | R | S | T | U | Weight (kg) | Weight (kg) |
| MX2-3/8-FR....- | G3/8 | G1/8 | 70 | 45 | M47x1,5 | 55,5 | 74,5 | 68 | G1/8 | 66 | 290 | 127 | 78 | 5 | 85 | 174,5 | 37,5 | 0 ÷ 16 | 0,8 | 0,8 |
| MX2-1/2-FR....- | G1/2 | G1/8 | 70 | 45 | M47x1,5 | 55,5 | 74,5 | 68 | G1/8 | 66 | 290 | 127 | 78 | 5 | 85 | 174,5 | 37,5 | 0 ÷ 16 | 0,8 | 0,8 |
| MX2-3/4-FR....- | G3/4 | G1/8 | 70 | 45 | M47x1,5 | 55,5 | 74,5 | 68 | G1/8 | 66 | 290 | 127 | 78 | 5 | 85 | 174,5 | 37,5 | 0 ÷ 16 | 0,8 | 0,8 |
| MX3-3/4-FR....- | G3/4 | G1/4 | 89,5 | 54 | M57x1,5 | 61,5 | 81 | 76 | G1/8 | 75 | 345 | 142 | 104 | 5 | 99 | 196,5 | 44,5 | 0 ÷ 20 | 1,3 | 1,3 |
| MX3-1-FR....- | G1 | G1/4 | 89,5 | 54 | M57x1,5 | 61,5 | 81 | 76 | G1/8 | 75 | 345 | 142 | 104 | 5 | 99 | 196,5 | 44,5 | 0 ÷ 20 | 1,3 | 1,3 |
