text.skipToContent text.skipToNavigation
Series 5ES...BS

Series 5ES...BS

Series 5ES...BS axes are mechanical linear actuators in which the rotary movement generated by a motor is converted into a linear movement by means of a recirculating ball screw.
Series 5E is designed with a special self-supporting square profile with a recirculating ball guide integrated within the actuator, providing exceptional stiffness and resistance to external loads.
A stainless steel plate protects against the ingress of contaminating agents from the surrounding environment, especially dust and dirt.

The axis is available in three sizes; 50, 65 and 80. They can be combined in different configurations to create multi-axis systems. Thanks to the wide range of accessories, assembly is simple and intuitive, reducing assembly and commissioning times considerably.
The axis equipped with recirculating ball screw is particularly suitable for applications requiring a high repeatability and a high load capacity.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Construction electromechanical axis with recirculating ball screw
Design open profile with protection plate
Sizes 50, 65, 80
Strokes 15 ÷ 1000 mm for size 50; 15 ÷ 1500 mm for size 65; 15 ÷ 2000 mm for size 80;
Type of guide internal, with recirculating ball screw (cage type)
Fixing by means of slots on the profile and special clamps
Mounting motor in line and parallel
Operating temperature -10°C ÷ +50°C
Storage temperature -20°C ÷ +80°C
Protection class IP 40
Lubrication centralized lubrification by means of internal channels
Repeatability ± 0,02 mm
Duty cycle 100%
Use with external sensors Series CSH magnetic switches in special slots
Full screen
Your configuration
CODING EXAMPLE
5E S 050 BS 05P 0200 A S 1
5E SERIES
S PROFILE
S = square section
050 SIZE
050 = 50x50 mm
065 = 65x65 mm
080 = 80x80 mm
BS TRANSMISSION
BS = recirculating ball screw
05P SCREW PITCH
00P = without spindle (only for D version)
05P = 5 mm
10P = 10 mm
16P = 16 mm (only for size 080)
0200 TOTAL STROKE (TS)
See table of mechanical characteristics
A VERSIONS
A = standard axis
D = support axis (dummy)
S TYPE OF SLIDER
S = standard
C = short
1 NUMBER OF SLIDERS
1 = 1 slider
We think you are in United States.
Update your location?