United Kingdom
Rotary actuators
Series ARP
Model: "Rack & Pinion"
Sizes: 1, 3, 5, 10, 12, 20, 35, 55, 70, 100, 150, 250, 400
Rotational angles: 90°
Sizes: 1, 3, 5, 10, 12, 20, 35, 55, 70, 100, 150, 250, 400
Rotational angles: 90°
Series ARP rotary actuators have been designed to meet the high demands by the process industry, where they predominantly are used for controlling the opening and closing process valves whereas ball valves and butterfly valves are the most common types.
The actuators exist in thirteen different sizes in order to cover a wide range of applications. Through adjusting screws located on the end caps it is possible to mechanically adjust the opening/closing angle by ±5°.
All Series ARP rotary actuators are ATEX certified, the air connections are realized in accordance with Namur VDI/VDE 3845 drilling, while the interface drilling of the process valve is in accordance with ISO 5211 standard.
The actuators exist in thirteen different sizes in order to cover a wide range of applications. Through adjusting screws located on the end caps it is possible to mechanically adjust the opening/closing angle by ±5°.
All Series ARP rotary actuators are ATEX certified, the air connections are realized in accordance with Namur VDI/VDE 3845 drilling, while the interface drilling of the process valve is in accordance with ISO 5211 standard.
Download catalogue
Series
Accessories
Rot. actuator da - ARP-001-2AA-F0300-AEX
|
Size
Torque force 9 Nm
|
Operation
Double-acting
|
Rot. actuator da - ARP-003-2AA-F0400-AEX
|
|
Size
Torque force 24 Nm
|
Operation
Double-acting
|
Rot. actuator sr - ARP-005-1DA-F0507-AEX
|
|
Size
Torque force 50 Nm
|
Operation
Single-acting, minimum pressure of 6 bar
|
Rot. actuator da - ARP-005-2AA-F0507-AEX
|
|
Size
Torque force 50 Nm
|
Operation
Double-acting
|
Ro.act.s.arp atex - ARP-020-2AA-F0710-AEX
|
|
Size
Torque force 200 Nm
|
Operation
Double-acting
|
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Type of construction | Rack and pinion type |
| Operation | Spring return (single-acting), double-acting |
| Materials | Extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals |
| Sizes | 001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400 |
| Operating temperature | - 30°C ÷ 100°C |
| Rotation angle | 90° |
| Type of mounting | Direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin* |
| Operating pressure | 2 ÷ 10 bar |
| Fluid | Filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
| Available spare part kits | - Kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return. |
| Certification | ATEX |
*Bracket and adaptor pin is not supplied by Camozzi
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Coding example
| ARP | - | 003 | - | 1A | A | - | F0300 | - | A | EX |
| ARP | SERIES | |
| 003 |
SIZE 001 = torque force 9 Nm (only double effect) 003 = torque force 24 Nm 005 = torque force 50 Nm 010 = torque force 100 Nm 012 = torque force 120 Nm 020 = torque force 200 Nm 035 = torque force 370 Nm 055 = torque force 597 Nm 070 = torque force 825 Nm 100 = torque force 1122 Nm 150 = torque force 1655 Nm 250 = torque force 2648 Nm 400 = torque force 4800 Nm |
|
| 1A |
OPERATION 1A = single-acting, minimum pressure of 4 bar 1B = single-acting, minimum pressure of 5 bar 1C = single-acting, minimum pressure of 5,5 bar 1D = single-acting, minimum pressure of 6 bar 2A = double-acting |
PNEUMATIC SYMBOLS CD19 / CD21 CD19 / CD21 CD19 / CD21 CD19 / CD21 CD17 |
| A |
ROTATION ANGLE A = 90° |
|
| F0300 |
INTERFACE FOR FLANGE (ISO 5211) F0300 = F03 flange and 9mm square holes F0305 = F03 flange holes + F05 flange and 9mm square holes F0400 = F04 flange and 11mm square holes F0507 = F05 flange holes + F07 flange and 14mm square holes F0705 = F07 flange holes + F05 flange and 17mm square holes F0710 = F07 flange holes + F10 flange and 17mm square holes F1007 = F10 flange holes + F07 flange and 22mm square holes F1210 = F12 flange holes + F10 flange and 27mm square holes F1400 = F14 flange and 36mm square holes F1600 = F16 flange and 46mm square holes F2516 = F25 flange + F16 flange and 55mm square holes |
|
| A |
MATERIALS A = standard anodized W = all FKM seals (130°C) |
|
| EX | ATEX certified product |
1-1/1 results
