text.skipToContent text.skipToNavigation
Series 2

Series 2

Handle with incorporated micro valve 3/2 NC and NO
Handle with incorporated micro switch
Manual handle with integrated pneumatic micro valve 3/2 or with an electrical micro switch with single pole changeover contacts.
Rugged construction particularly suited to be incorporated in to other equipment.

Series
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Construction poppet-type (closed centres)
Valve group way/pos. 3/2 way NC and NO
Nominal diameter 2,5 mm
Fixing N°2 holes M5
Ports push in cartdrige Ø4
Installation in any position
Operating temperature 0 ÷ +70°C (-20°C with dry air)
Operating pressure 2 ÷ 8 bar
Nominal flow rate Qn 60 Nl/min. (6 bar ∆ p1)
Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended
to use ISO VG32 oil. Once applied the lubrication should never be interrupted.
Actuating force at 6 bar 13N
Construction switch device
Electrical connections 3 wires Ø external 2,2 mm internal section 0,5 length 30 cm
NC = black wire
NO = blue wire
Fixing N° 2 holes M5
Mounting in any position
Protection class IP40
Activation stroke 2 mm
Actuating force 5 N
Full screen
Your configuration