text.skipToContent text.skipToNavigation
Series 2

Series 2

Handle with incorporated micro valve 3/2 NC and NO
Handle with incorporated micro switch
Manual handle with integrated pneumatic micro valve 3/2 or with an electrical micro switch with single pole changeover contacts.
Rugged construction particularly suited to be incorporated in to other equipment.

1-1/1  results
Series
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
Construction poppet-type (closed centres)
Valve group way/pos. 3/2 way NC and NO
Nominal diameter 2,5 mm
Fixing N°2 holes M5
Ports push in cartdrige Ø4
Installation in any position
Operating temperature 0 ÷ +70°C (-20°C with dry air)
Operating pressure 2 ÷ 8 bar
Nominal flow rate Qn 60 Nl/min. (6 bar ∆ p1)
Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended
to use ISO VG32 oil. Once applied the lubrication should never be interrupted.
Actuating force at 6 bar 13N
Construction switch device
Electrical connections 3 wires Ø external 2,2 mm internal section 0,5 length 30 cm
NC = black wire
NO = blue wire
Fixing N° 2 holes M5
Mounting in any position
Protection class IP40
Activation stroke 2 mm
Actuating force 5 N
Full screen
Your configuration