text.skipToContent text.skipToNavigation
Series K8DV

Series K8DV

2/2-way - Normally Closed (NC)
The K8DV solenoid valve was born to meet all the demands to shut off aggressive or heat sensitive fluids. Thanks to a fluid separation membrane, the fluid is isolated from all internal metal parts of the solenoid valve and avoids heating, even if minimum, generated by the solenoid positioned above.

To choose the most suitable model for a specific application, check the chemical compatibility of the medium to control with the available materials of body and seals.
Series
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
TECHNICAL FEATURES
Function 2/2 NC
Operation direct acting with fluid separation membrane
Pneumatic connections cartridge seat in manifold - on subbase
Orifice diameter 0.7 mm
Flow coefficient kv (l/min) 0.1
Operating pressure 0 ÷ 2.1 bar (FKM/EPDM) / 0 ÷ 1.5 bar (FFKM)
Operating temperature 5 ÷ 50 °C (FKM/EPDM) / 20 ÷ 50 °C (FFKM)
Fluid inert or corrosive liquids and gases compatible with the materials in contact
Response time (ISO 12238) ON ≤ 10 ms - OFF ≤ 15 ms
Installation in any position
MATERIALS IN CONTACT WITH THE MEDIUM
Body PEEK
Seals FKM - EPDM - FFKM
ELECTRICAL FEATURES
Voltage 3 ... 24 V DC - other voltages on demand
Voltage tolerance ±10%
Power consumption 0.6 W
Duty cycle ED 100%
Electrical connection 2 pins 0.5 x 0.5 pitch 4 mm
Protection class IP00
CODING EXAMPLE
K8DV C 00 5 0 5 G 2 3
K8DV SERIES
C TYPE OF BODY
C = cartridge version
0 = flanged version
00 NUMBER OF POSITIONS
00 = valve without housing
5 NUMBER OF WAYS - FUNCTIONS
5 = 2/2-way - NC
0 SEAL MATERIAL
0 = FKM
4 = EPDM
5 = FFKM
5 ORIFICE DIAMETER
5 = Ø 0.7 mm
G BODY MATERIAL
G = PEEK
2 ELECTRICAL CONNECTION
2 = pins - pitch 4 mm
3 VOLTAGE - POWER CONSUMPTION
1 = 6V DC - 0.6 W
2 = 12V DC - 0.6 W
3 = 24V DC - 0.6 W
4 = 3V DC - 0.6 W
5 = 5V DC - 0.6 W
OPTIONS:
= standard
OX1 = for use with oxygen (non volatile residual less than 550 mg/m²)