text.skipToContent text.skipToNavigation

Self-centering parallel grippers with double ball bearing guide

Series CGPS

Self-centering parallel grippers with double ball bearing guide

Series CGPS

Self-centering parallel grippers with double ball bearing guide

Series CGPS

Robust, compact and light design
High closing/opening forces
Fixing from below and from the side
Supply on the side
Self-centering jaws
High closing and opening repeatability
High interchangeability (bushes and centering plugs)
Position detection (front and side) thanks to the use of Series CSD magnetic proximity switches
Protection against dust (IP40)
Finger types available: long with through-holes and flat with threaded holes
High resistance to external loads thanks to the double ball bearing guide
Variants available for use in ATEX zones and for high temperatures

Single and double acting, magnetic, self-centering
Bores: Ø 10, 16, 20, 25, 32 mm

Thanks to the use of a high performing and precise force transmission system and to the double ball bearing guide, the Series CGPS grippers are able to provide high gripping forces while guaranteeing a very high repeatability and robustness (resistance to external static and dynamic loads).

The wide range of sizes available allows you to find the best solution for any handling need. The grippers can be supplied with bushes and centering plugs (tolerance H8) which, once positioned on the body and/or on the jaws, are able to guarantee, during maintenance, a high interchangeability of the gripper and of the extensions.

Download catalogue

Robust, compact and light design
High closing/opening forces
Fixing from below and from the side
Supply on the side
Self-centering jaws
High closing and opening repeatability
High interchangeability (bushes and centering plugs)
Position detection (front and side) thanks to the use of Series CSD magnetic proximity switches
Protection against dust (IP40)
Finger types available: long with through-holes and flat with threaded holes
High resistance to external loads thanks to the double ball bearing guide
Variants available for use in ATEX zones and for high temperatures

Purchasable codes

Series

Accessories

there are no salable codes online

If you have entered Filters, try changing them or look in the "Configurator" tab

General Data

Type of construction	Self-centering parallel gripper with double ball bearing guide
Operation	Single acting (NO, NC), double acting
Bores	Ø 10, 16, 20, 25, 32 mm
Force transmission	Lever
Air connections	M3-M5 (M3 for size 10 only)
Working pressure	2 ÷ 8 bar (double acting), 4 ÷ 8 bar (single acting)
Working temperature	5°C ÷ 60°C (standard); 5°C ÷ 150°C (high temperature version)
Store temperature	-10°C ÷ 80°C
Maximum use frequency	3 Hz
Repeatability	0.02 mm
Interchangeability	0.1 mm
Medium	Filtered air in class 7.4.4 according to ISO 8573-1. In case lubricated air is used, we recommend ISOVG32 oil and to never interrupt lubrication.
Compatibility	ROHS Directive
Certifications	ATEX (II 2GD c IIC 120°C(T4)-20°C≤Ta≤80°C)
Materials	PTFE, Silicone and Copper free
Suitable magnetic proximity switches	Series CSD