text.skipToContent text.skipToNavigation
Series 3 and Series 2

Series 3 and Series 2

Series 3: G1/4, 5/2-way - NC / NO contacts
Series 2: M5; 4/2 tube; 3/2-way NC
The pedals can be supplied in either a pneumatic or electrical foot operated version. The pneumatic type is available with a 5/2 valve and G1/4 front ports, which allow the fittings and silencers to be assembled conveniently on the front face. A 3/2 operation can be obtained by closing an outlet port.
The electrical type is available with a single-pole changeover contact microswitch and a front wire outlet (PG9).

The pedal can be operated as bistable
or monostable, by switching the selector
placed under the small red protection flap, as shown in the drawing.
Series
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab

Valve group 5/2, 3/2 NC way/pos.
Materials - Series 3: alluminium body - stainless steel spool - NBR seals - plastic casing
- Series 2: alluminium body - OT58 poppet - NBR seals.
Ports - Series 3: G1/4 gas
- Series 2: M5; tube 4/2.
Ambient temperature 0°C ÷ 50 °C (with dry air at - 10°C)
Medium temperature 0°C ÷ 50 °C
Construction spool-type
Cable entry by means of wire PG9
Protection class IP20
Fluid Filtered air, without lubrication.
If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.