中国香港
样本下载Series
Accessories
Magn. prox. switch (hall) m8 - CST-562
|
接口
3 wires with M8 connector (CSD only)
|
操作
Magnetoresistive NPN
|
Accessory kit handling _ - M-CGSP-20
Accessory kit handling _ - M-CGSP-25
Accessory kit handling _ - M-CGSP-32
Accessory kit handling _ - M-CGSP-40
Accessory kit handling _ - I-CGSP-20
Accessory kit handling _ - I-CGSP-25
Accessory kit handling _ - I-CGSP-32
Accessory kit handling _ - I-CGSP-40
添加的数量:
addtocart.popup.message.success
请求的数量已部分确认
产品 {0} 已在您的购物车中，数量为 {1} 。您可以从购物车页面更新数量
产品未激活
由于库存不足，无法将此产品添加到购物车
数量必须大于零
产品 {0} 允许的最小数量为 {1}
产品 {0} 允许的最大数量为 {1}
产品 {0} 的包装尺寸是 {1}
无法将代码 {0} 的产品添加到此购物车
出现错误，请稍后重试或联系客户支持
全屏
添加的数量:
addtocart.popup.message.success
请求的数量已部分确认
产品 {0} 已在您的购物车中，数量为 {1} 。您可以从购物车页面更新数量
产品未激活
由于库存不足，无法将此产品添加到购物车
数量必须大于零
产品 {0} 允许的最小数量为 {1}
产品 {0} 允许的最大数量为 {1}
产品 {0} 的包装尺寸是 {1}
无法将代码 {0} 的产品添加到此购物车
出现错误，请稍后重试或联系客户支持
CST. CSV 和 CSH 系列磁性接近开关代号
| CS | T | 2 | 2 | 0 | N | 5 | EX |
| CS | 系列 |
| T |
安装方式 T = T 形槽安装 V = V 形槽安装 H = 直接放入槽内 |
| 2 |
工作方式 2 = 簧片式（NO） 3 = 电子式 4 = 簧片式（NC） |
| 2 |
电气连接方式 2 = 二线制（仅限簧片式） 3 = 三线制 5 = 二线制，M8 插座（仅限簧片式） 6 = 三线制，M8 插座 |
| 0 |
电压 0 = 二线制，10 - 110V DC，10 - 230V AC（仅限 CST 和 CSV） 1 = 30 - 110V DC，30-230V AC（仅限 CSH） 2 = 三线制（仅限 CST 和 CSV） 3 = 10 - 30V AC/DC（仅限 CSH） 4 = 10 - 27V DC（仅限 CSH） |
| N |
类型 N = 符合 NORM 标准（仅限 CST/CSV-250N） |
| 5 |
导线长度 = 2 m 5 = 5 m |
| EX |
CSB 和 CSC 系列磁性接近开关代号
CST. CSV 和 CSH 系列磁性接近开关代号
Magnetic proximity switches with M8 3-pin connector for T-slot
Mod. CST-250N
注：接线时如果极性接反.开关仍可正常工作.只是 LED 指示灯将不会发光。
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot Mod. CST
Cable length: 0.3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on.
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
磁性接近开关 - 带 插座 CST...
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
磁性接近开关 - 带 插座
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
磁性接近开关 - 带 插座
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
磁性接近开关 - 带 插座
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
磁性接近开关 - 带 插座
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
Magnetic proximity switches with M8 3-pin connector for T-slot
Cable length: 0,3 m
| 型号 | 工作方式 | 插座 | 电压 | 电气输出 | 最大电流 | 最大功率 | 电气保护 |
| CST-250N | 簧片式 | 2 线制，M8 插座 | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | - |
| CST-250NEX | Reed | 2 wires M8 male 3 pin | 10 ÷ 110 V AC/DC | - | 250 mA | 10 VA / 8 W | None |
| CST-262 | 簧片式 | 3 线制，M8 插座 | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | 反极性保护 |
| CST-262EX | Reed | 3 wires M8 male 3 pin | 5 ÷ 30 V AC/DC | PNP | 250 mA | 10 VA / 8 W | Against polarity reversing |
| CST-362 | Magnetoresistive | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-362EX | Magnetoresistive | 3 wires M8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
| CST-562 | Hall effect | 3 线制，M8 插座 | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | 反极性保护.过电压保护 |
| CST-562EX | Hall effect | 3 wiresM8 male 3 pin | 10 ÷ 27 V DC | PNP | 100 mA | 6 W | Against polarity reversing and overvoltage |
in case of polarity reversing the sensor will still be operating, but the LED diode won't turn on
1-10/10 结果
