United States
Micro regulator electronic proportional
Series K8P
Proportional regulator for the pressure control
Series K8P electronic proportional micro regulators have evolved from our Series K8 mini-solenoid valves. Series K8P regulators guarantee excellent pressure regulation, fast response times, self-regulation and low energy consumption.
Series K8P is a high performance proportional pressure regulator which is suitable for use in all applications where high precision, quick response times and low consumption are required.
The K8P regulator adjusts the outlet pressure through the operation of two K8 monostable valves according to the inlet signal and to the retroactivity of the internal pressure sensor. A self-adjusting function has been integrated into the regulator control algorithm to guarantee the highest levels of performance apart from the volume connected.
Series K8P is a high performance proportional pressure regulator which is suitable for use in all applications where high precision, quick response times and low consumption are required.
The K8P regulator adjusts the outlet pressure through the operation of two K8 monostable valves according to the inlet signal and to the retroactivity of the internal pressure sensor. A self-adjusting function has been integrated into the regulator control algorithm to guarantee the highest levels of performance apart from the volume connected.
Download catalogueSeries
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Fluids | filtered compressed air, unlubricated, according to ISO 8573-1 class 7.4.4, oxygen, inert gases (argon, molecular nitrogen) |
| Pressures | Regulated pressure 0,5 ÷ 10 bar 0,15 ÷ 3 bar 0,35 ÷ 7 bar 0,05 ÷ 1 bar Max inlet pressure 11 bar 4 bar 8 bar 1,5 bar |
| Working temperature | 0 ÷ 50°C |
| Analogical input | 0-10 V DC 4-20 mA Ripple ≤ 0,2% |
| Analogical output | 0,5 - 9,5 V [ Feedback ] |
| Analog input impedance | 20.000 Ω for versions 0-10 V 250 Ω for versions 4-20 mA |
| Maximum flow | 12 l/min with regulated pressure = 6 bar (IN Pres. 10 bar) 6 l/min with regulated pressure = 3 bar (IN Pres. 4 bar) 8 l/min with regulated pressure = 7 bar (IN Pres. 8 bar) 2 l/min with regulated pressure = 1 bar (IN Pres. 1,5 bar) |
| Supply / Use | 24 V - ~ 1 W |
| Function | 3/2 NC |
| Linearity | ≤ ±1% FS |
| Hysteresis | ±0,5% FS |
| RESOLUTION | ±0,5% FS (referred to the command signal) |
| Repeatability | ±0,5% FS |
| Minimal set point change | 50 mV => 50 mB (10 bar) 100 mV => 30 mB (3 bar) |
| Electrical connection | M8 4 Pin (Male) |
| Protection class | IP65 (with standard sub-base or with single use) IP51 (with Light sub-base and Light Sub-base for the pressure remote reading) |
| In compliance with the European Directive 2004/108/EC |
Full screen
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
Series K8P electronic proportional micro regulator
M8 4-pole male connector
Pin 1: +24 V DC (Power supply)
Pin 2: Command analogical signal 0-10 V DC or 4-20 mA
Pin 3: 0 V (Ground) common also for the command signal
Pin 4: Output analogical signal (according to the regulated pressure)
5 Red LED
6 Green LED
| Mod. | Working pressure | Use with oyxgen | Command |
| K8P-*-D522-** | 0-10 bar | no | 0-10 V DC |
| K8P-*-E522-** | 0-3 bar | no | 0-10 V DC |
| K8P-*-D532-** | 0-10 bar | no | 4-20 mA |
| K8P-*-E532-** | 0-3 bar | no | 4-20 mA |
| K8P-*-B522-** | 0-1 bar | no | 0-10 V DC |
| K8P-*-F522-** | 0-7 bar | no | 0-10 V DC |
| K8P-*-B532-** | 0-1 bar | no | 4-20 mA |
| K8P-*-F532-** | 0-7 bar | no | 4-20 mA |
| K8P-*-B522-**OX1 | 0-1 bar | yes | 0-10 V DC |
| K8P-*-F522-**OX1 | 0-7 bar | yes | 0-10 V DC |
| K8P-*-E522-**OX1 | 0-3 bar | yes | 0-10 V DC |
| K8P-*-B532-**OX1 | 0-1 bar | yes | 4-20 mA |
| K8P-*-F532-**OX1 | 0-7 bar | yes | 4-20 mA |
| K8P-*-E532-**OX1 | 0-3 bar | yes | 4-20 mA |
** = all the cables can be supplied for all versions
