Solenoid valve - 3/2-way NC - in-line connector

Series K

Supplied with:
1x interface seal
2x Ø

Purchasable codes

Series

Accessories

there are no salable codes online

If you have entered Filters, try changing them or look in the "Configurator" tab

Configurator

Full screen

CODING EXAMPLE

K	SERIES
0	BODY DESIGN 0 = single sub-base (only M5) or interface 1 = manifold
00	NUMBER OF POSITIONS 00 = interface 01 = single base (only M5) 02 ÷ 99 = manifold number of positions
3	NUWAYS - FUNCTMBER OF IONS 0 = manifold or single base 1 = 2/2-way - NC 2 = 2/2-way - NC electric part revolved by 180°	3 = 3/2-way - NC 5 = 3/2-way - NC electric part revolved by 180°	4 = 3/2-way - NO 6 = 3/2-way - NO electric part revolved by 180°
0	PORTS: 0 = on subbase or manifold 2 = M5 side outlets
3	ORIFICE DIAMETER 2 = Ø 0.6 mm 3 = Ø 0.8 mm 5 = Ø 1.0 mm
K	MATERIALS F = PBT body - FKM poppet seal K = PBT body - HNBR poppet seal (only for 3/2-way versions)
2	ELECTRICAL CONNECTION 1 = 90° connection with protection and led 2 = 90° connection with protection 3 = 90° connection	B = in-line connection with protection and led C = in-line connection with protection D = in-line connection	F = 300 mm flying leads with protection and led G = 300 mm flying leads with protection H = 300 mm flying leads
3	VOLTAGE - POWER CONSUMPTION 1 = 6V DC - 1W 2 = 12V DC - 1W 3 = 24V DC - 1W
	FIXING = fixing screws for plastic M = fixing screws for metal
	OPTIONS = standard OX1 = for use with oxygen (non volatile residual less than 550 mg/m²) OX2 = for use with oxygen (non volatile residual less than 33 mg/m²)

Dimensions

Series K solenoid valve - 3/2-way NC - in-line connector

* add
- VOLTAGE
(see CODING EXAMPLE)