United States
Compact cylinders, Tandem and Multi-position versions
Series 31
Double-acting, magnetic
ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm
ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm
The compact dimensions allow Series 31 cylinders to be installed within very small spaces. These cylinders are suitable for use with feet, flange and trunnion mountings.
In order to complete the compact cylinder series, two new versions have been introduced: tandem and multi-position.
The new Tandem version with 2, 3 or 4 stages generates a thrust force which is 2, 3 or 4 times that of the normal cylinder (standard traction force).
The Multi-position version allows a maximum of 3 different positions which are determined by the stroke of the individual actuators.
In order to complete the compact cylinder series, two new versions have been introduced: tandem and multi-position.
The new Tandem version with 2, 3 or 4 stages generates a thrust force which is 2, 3 or 4 times that of the normal cylinder (standard traction force).
The Multi-position version allows a maximum of 3 different positions which are determined by the stroke of the individual actuators.
Download catalogueSeries
Accessories
there are no salable codes online
If you have entered Filters, try changing them or look in the "Configurator" tab
there are no salable codes online
Look in the "Accessory" tab for the Configurator
Quantity added:
addtocart.popup.message.success
The requested quantity is partially confirmed
Product {0} is already in your cart with quantity {1}. You can update the quantity from cart page.
Product is not active
The product could not be added to the cart due to insufficient stock
Quantity must be greater than zero
Min allowed quantity for product {0} is {1}
Max allowed quantity for product {0} is {1}
Pack size for product {0} is {1}
It is not possible to add the product with code {0} to this cart
An error occurred, please try again later or contact customer support
| Type of construction | compact profile |
| Operation | double-acting |
| Materials | AL body and end-blocks - rolled stainless steel AISI 303 rod - AL piston - PU rod and piston seals |
| Mounting | flange - feet - trunnion |
| Min and max strokes (for tandem 31M and 31F) Min and max strokes (for multi-position 31M and 31F) |
ø12÷25 = 1÷80 mm ø32÷100 = 1÷100 mm ø12÷25 = dimension for X2 max 200 mm ø32÷63 = dimension for X2 max 300 mm ø80÷100 = dimension for X2 max 400 mm |
| Operating temperature | 0°C ÷ 80°C (with dry air -20°C) |
| Operating pressure | 1 ÷ 10 bar |
| Medium | filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. |
| Speed | 10 ÷ 1000 mm/sec (without load) |
1-13/13 results
.jpg "Mod. D-E")
